Loading ...
Loading ...
Loading ...
en-us Basic Operation
18
¡ The grinder has been factory-set for
optimum operation. If coffee is only
dispensed drop by drop or is too
thin and with too little crema, you
can adjust the grinding level when
the grinder is running.
→
"Setting the grinding level",
Page20
¡ During operation water droplets may
form at the ventilation slits and on
the lid of the tablet compartment.
¡ If you do not perform any actions on
the appliance for a certain period, it
will automatically switch off. You
can change the duration in the basic
settings.
¡ For technical reasons steam can
escape from the appliance.
¡
The first beverage will not yet have
its full aroma if:
– You are using the appliance for
the first time.
– You have run a machine care
cycle.
– You have not used the appliance
for a long time.
Tip:You will get a stable, fine-pored
crema after you have started up your
appliance and dispensed a few cups.
Basic Operation
7 Basic Operation
Basic Operation
7.1 Switching the appliance
on or off
▶ Press
.
When the appliance switches on,
the display shows the logo. When
the appliance is switched on or off, it
will rinse itself automatically. When
switched off, the appliance will emit
steam into the drip tray for cleaning.
The appliance will not rinse itself if
the appliance is still warm when
switched on or if no beverage was
dispensed before it was switched
off.
7.2 Dispensing beverages
Find out how to prepare a drink of your
choice.
WARNING
Freshly prepared beverages are very
hot.
▶ Let drinks cool down if necessary.
▶ Do not let escaping liquids or steam
come into contact with your skin.
Notes
¡ With a number of settings your
coffee is prepared in several steps.
Wait until the process has
completely finished.
¡ If you are dispensing a beverage
with milk, always connect a
container filled with milk to the milk
inlet tube and suction pipe.
Loading ...
Loading ...
Loading ...