Loading ...
Loading ...
Loading ...
en-us Before using for the first time
16
13.Insert the milk system in the cover
of the beverage dispenser.
14.Hook in the cover of the beverage
dispenser at the bottom and snap it
in at the top.
15.Connect a carton of milk to the milk
inlet tube and the suction pipe.
Note:Fill the water tank each day with
fresh, cold, non-carbonated water.
Tip:To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for several days
without them losing their aroma.
6.2 Checking the water hard-
ness
It is important to set the right water
hardness so your appliance indicates
in good time that it needs descaling.
You can use the enclosed test strip to
check the water hardness or ask your
local water company.
1. Briefly dip the test strip in fresh tap
water.
2. Allow the water to drain off the test
strip.
3. Read the water hardness off the test
strip after 1minute.
The table shows allocation of the
levels to the different degrees of
water hardness:
Level Water hardness in gr/
gal (US)
1 1.0426 - 7.2985
2 8.3412 - 14.597
3 15.64 - 21.896
4
1
22.938 - 31.279
1
Factory setting
Note:Please use the test strip even if
you have a water softening system
installed as they generate different
water hardnesses.
Tips
¡ You can change the settings at any
time.
→
"Basic settings", Page24
¡ If the water hardness is higher than
21.896gr/gal (US), you can fill the
water tank with prefiltered water to
reduce limescale deposits in the
water tank.
Loading ...
Loading ...
Loading ...