Loading ...
Loading ...
Loading ...
15
Heating Mode
To initiate the heating mode, touch and hold the heating key for 3 seconds until the heating mode
indicator lights up. The heating mode can be canceled by repeating the above process until the
heating mode indicator goes off.
You can set the temperature by touching the UP and DOWN keys. When you touch either of the
two keys for the first time, the LED readout will show the original temperature set previously. (The
temperature preset at the factory is 85°F or 30°C.)
The temperature you are setting will increase by 1°C or 5°F each time you touch the UP key and
will decrease by 1°C or 5°F each time you touch the DOWN key.
Press and hold either key to
advance the values rapidly.
The range of set temperatures is from 80°F/25°C to 200°F/95°C.
To view the set temperature at any time, touch the UP or DOWN key. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.
The unit has a built-in timer that will automatically turn off after four hours of use. To view the left
time at any time, touch the Timer key. The left time (The left two digits are for hours and the right
two digits are for minutes.) will temporarily flash in the display window for 5 seconds. Then the
display shows the current inner temperature again.
The timer can be adjusted from one minute to 24 hours as below.
1. Lightly touch the Timer key once and the left two digits in the display will flash.
2. Use the UP and DOWN keys to set the hours.
3. Lightly touch the Timer key again and the right two digits in the display will flash.
4. Use the UP and DOWN keys to set the minutes.
5. Lightly Touch the Timer key again to leave setting mode. Otherwise, the appliance exits the
setting mode automatically after approximately 5 seconds.
Sabbath Mode
Sabbath mode is available for the observance of certain religious holidays. This mode turns off
the displays, interior light and audible alarms and prevents them from turning on again. Normal
cooling or heating operations will still take place.
To initiate Sabbath mode, touch the POWER and TIMER keys at the same time and hold for at
least 5 seconds. The indicator light (the dot at the bottom right of the display) will flash four times
and the display will go out to confirm the Sabbath mode is ON.
Sabbath mode can be canceled by repeating the above process. The Sabbath Mode will
automatically turn off after 48 hours.
In heating mode, Sabbath overrides the automatic shut off feature and Sabbath must be reset
after a power outage.
Temperature Memory Function
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the
previous temperature settings, and when power is recovered, the cabinet temperature will return to
the same set temperature as before the power went off.
Defrosting
Under normal operating conditions, the unit requires no manual defrosting.
The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in
the drainage channel behind the rear wall of the unit and flows through the drainage hole into the
drip tray by the compressor where it evaporates.
However, frost may accumulate on the evaporator if the unit is repeatedly opened in high heat or
Loading ...
Loading ...
Loading ...