Loading ...
Loading ...
Loading ...
11
Installing the Stainless Steel Handle
This appliance includes a stainless steel handle
that is not required to operate the unit. To install the
handle, follow the instructions below:
1. Remove the door gasket.
2. Install the handle with the screws provided. (DO
NOT over-tighten as this will cause damage to
the stainless steel door surface.)
3. Replace the door gasket.
Installing the Anti-Tip Brackets
Included with this unit is a pair of anti-tip brackets to
help prevent the unit from moving inside the
countertop when opening the drawer.
Place the provided brackets in front of the unit’s
ventilation grille as shown the figure. Then, secure
the brackets to both walls and the unit using the
included screws.
NOTE: If the unit is installed freestanding, please
place the brackets in front of the unit’s ventilation
grille and secure the brackets to the surface it is
being used on by the included screws.
Anti-tip
Bracket
Screw
Screw
Anti-tip
Bracket
Loading ...
Loading ...
Loading ...