Loading ...
Loading ...
Loading ...
14
Up
Used to increase (warm) the set temperature by 1°C/1ºF. Press and hold the key can advance the
values rapidly.
Down
Used to decrease (cool) the set temperature by 1°C/1ºF. Press and hold the key can advance the
values rapidly.
Timer
Used to set the timer in heating mode.
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the Timer key for 5 seconds.
Indicator Light
The indicator light is the dot located at the top left corner of the display. The indicator light will be on
when a multi-key function is selected. To perform a multi-key function, touch and hold the first key,
then touch the second key for at least 5 seconds and then release both keys.
Child Lock
The child lock will be activated automatically if in 2 minutes or longer, no key is touched. To cancel
the lock, touch the UP and DOWN keys at the same time for at least 5 seconds and the indicator
light will flash three times to confirm the action.
Cooling Mode
To initiate the cooling mode, touch and hold the cooling key for 3 seconds until the cooling mode
indicator lights up. The cooling mode can be canceled by repeating the above process until the
cooling mode indicator goes off.
Cooling mode is the default mode. After connecting the unit into the power supply for the first
time, the unit will operate in cooling mode automatically if in 10 seconds no mode has been
selected.
You can set the temperature by touching the UP and DOWN keys. When you touch either of the
two keys for the first time, the LED readout will show the original temperature set previously. (The
temperature preset at the factory is 38°F or 3°C.)
The temperature you are setting will increase by one degree each time you touch the UP key and
will decrease by one degree each time you touch the DOWN key.
The range of set temperatures is from 36°F/2°C to 43°F/6°C.
To view the set temperature at any time, touch the UP or DOWN key. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.
NOTE:
If the unit is disconnected from the power or power is lost or turned off, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this time delay, the unit will
not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
Loading ...
Loading ...
Loading ...