Loading ...
Loading ...
Loading ...
MDO-2000A series User Manual
242
Set Source
1. Select a source channel by pressing
CH1Filter, CH2 Filter.
2. From the side menu press Filtering
and turn on.
3. Press Filter Type and select low,
high, or band
pass filter.
Type
Low Pass, High Pass, Band Pass
4. If Low Pass was selected, press
Upper Limit to set the low pass
cutoff frequency. Likewise if High
Pass was selected, press Lower
Limit to set the high pass cutoff
frequency. Only one option will be
available at a time.
Upper Limit
1Hz ~ 0.495 x sampling frequency
Lower Limit
1Hz ~ 0.495 x sampling frequency
Tracking
5. Press Tracking if you want the
settings of the digital filter on each
channel to be the same. When a
setting is changed on one channel,
it is reflected on the other channels.
Note
The digital filter settings will still apply to the relevant
input signals after leaving the app, unless turned off.
Loading ...
Loading ...
Loading ...