Loading ...
Loading ...
Loading ...
MDO-2000A series User Manual
220
Panel Operation
5. Press the Span button
to display a list of
frequencies step-
resolution.
The variable knob can
be used to select one.
Press again on the Span
button; the variable
knob can now be used
to set the frequency in
increments of the
chosen step resolution.
6. Alternatively, select User from the
list of frequency or press the Select
key. Use the arrows to select a base
unit and the variable knob to
further tune the selected base unit.
Press Go Back to return to the
previous menu and validate the
user-defined value.
Range
1kHz ~ 1GHz
Start and Stop
Frequencies
The Start and Stop frequencies can also be used to
specify the span frequency.
Note
The Start and Stop frequencies are automatically
adjusted when configuring the Center and the Span.
Conversely, configuring the Start and Stop frequencies
will automatically configure the Center and the Span.
The Stop frequency must always be higher than the
Loading ...
Loading ...
Loading ...