Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
74
Delete Linkage
Settings
Select the configured linkage settings in the device list and click
Delete to delete it.
Edit Linkage Settings
Select the configured linkage settings in the device list and you can
edit its event source parameters, including event source and linkage
target.
6.6.4 Configure Device Actions for Person ID
You can set the access control device's linkage actions for the specified person ID. When access
control device detects the specified person ID, it can trigger the alarm output, buzzer on card
reader, and other actions, so as to implement special monitoring on the specified person.
Steps
Note
It should be supported by the device.
1. Click Access Control → Linkage Configuration.
2. Select the access control device from the list on the left.
3. Click Add to add a new linkage.
4. Select Person Linkage as the event source.
5. Enter the employee number or select the person from the drop-down list.
6. Select the card reader where the card swipes.
7. In the Linkage Target area, set the property target to enable this action.
Buzzer on Controller
The audible warning of access control device will be triggered.
Buzzer on Reader
The audible warning of card reader will be triggered.
Capture
An event-related picture will be captured when the selected event happens.
Recording
An event-related picture will be captured when the selected event happens.
Note
The device should support recording.
Alarm Output
Loading ...
Loading ...
Loading ...