Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
11
2. Enter the new user's parameters.
ID (Employee ID)
By default, the ID No. will be increased in sequence. You can edit the ID according to your
preference.
Note
● The ID refers to the user attendance serial No.
● The ID should be between 1 and 99999999 and should not start with 0.
● The ID should be used for once.
Name
Enter the new user name.
Note
● Press the up or down key on the keypad to change the input method.
● Up to 64 characters are allowed in the user name.
Card
Set: Swipe card on the card swiping area or enter card No. manually, and select a card
property.
View Info.: View the user's added card information.
Note
● The card No. is required.
● Up to 20 digits can be contained in the card No.
● The card No. can be 0.
● The card No. can start with 0 when it contains more than one numbers. E.g. 012345.
● The card No. should be used for once.
● If device does not support swiping card, you should enter the card No. manually. If you
need to enter the card No. manually, you should enable Press Key to Input Card No.. For
details, see Configure Parameters for Access Control Device.
FP (Fingerprint)
On the Fingerprint page, select a target finger and record according to the voice prompt.
Note
● The same fingerprint cannot be repeatedly added.
● Up to 10 fingerprints can be added to one user.
● You can also scan the fingerprints via the external fingerprint recorder and apply the
fingerprints to the device by the client software.
● For detailed information about scanning the fingerprint, see Tips for Scanning Fingerprint.
Loading ...
Loading ...
Loading ...