Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
50
reduced mobility.
For details about setting the door's open duration, refer to Configure Parameters for Door.
Add to Blocklist
Add the person to the blocklist and when the person tries to access doors/floors, an event
will be triggered and send to the client to notify the security personnel.
Mark as Visitor
If the person is a visitor, set the maximum times of authentications, including access by card
and fingerprint to limit the visitor's access times.
Note
The maximum times of authentications should be between 1 and 100.
Device Operator
For person with device operator role, he/she is authorized to operate on the access control
devices.
Note
The Super User, Extended Door Open Time, Add to Blocklist, and Mark as Visitor functions
cannot be enabled concurrently. For example, if one person is set as super user, you cannot
enable extended door open time for her/him, add her/him to the blocklist, or set her/him as
visitor.
4. Confirm to add the person.
– Click Add to add the person and close the Add Person window.
– Click Add and New to add the person and continue to add other persons.
6.2.7 Customize Person Information
You can customize the person properties which are not pre-defined in the client according to
actual needs, e.g., place of birth. After customizing, when add a person, you can enter the custom
information to make the person information complete.
Steps
1. Enter Person module.
2. Set the fields of custom information.
1) Click Custom Property.
2) Click Add to add a new property.
3) Enter the property name.
4) Click OK.
3. Set the custom information when adding a person.
1) Select an organization in the organization list to add the person and click Add.
Loading ...
Loading ...
Loading ...