Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
71
Note
For setting the alarm sound, please refer to Set Alarm Sound in the user manual of the
client software.
Email Linkage
Send an email notification of the alarm information to one or more receivers.
2) Click OK.
5. Enable the event so that when the event is detected, en event will be sent to the client and the
linkage actions will be triggered.
6. Optional: Click Copy to... to copy the event settings to other access control device, alarm input,
door, or card reader.
6.6.2 Configure Device Actions for Access Event
You can set the access control device's linkage actions for the access control device's triggered
event. After that, when an event is triggered, it can trigger the alarm output, buzzer on access
controller, and other actions.
Steps
Note
The linkage actions should be supported by the device.
1. Click Access Control → Linkage Configuration.
2. Select the access control device from the list on the left.
3. Click Add to add a new linkage.
4. Select Event Linkage as the event source.
5. select the event type and detailed event to set the linkage.
6. In the Linkage Target area, set the property target to enable this action.
Buzzer on Controller
The audible warning of access control device will be triggered.
Capture
An event-related picture will be captured when the selected event happens.
Recording
An event-related picture will be captured when the selected event happens.
Note
The device should support recording.
Loading ...
Loading ...
Loading ...