Loading ...
Loading ...
Loading ...
-18-
Model W1666/W1685 (For Machines Mfd. Since 2/15)
SETUP
Once the assembly is complete, test run your machine
to make sure it runs properly and is ready for regular
operation.
The test run consists of verifying the following: 1) The
motor powers up and runs correctly, and 2) the safety
disabling mechanism on the switch works correctly.
If, during the test run, you cannot easily locate the source
of an unusual noise or vibration, stop using the machine
immediately, then review Troubleshooting on Page.34.
If you still cannot remedy a problem, contact our Tech
Support at (360) 734-3482 for assistance.
To.test.run.the.machine,.do.these.steps:
1. Make sure you understand the safety instructions
at the beginning of the manual, and verify that the
machine is setup properly.
2. Ensure all tools and objects used during setup are
cleared away from the machine.
3. Make sure the paddle ON/OFF switch (see Figure.18)
is pushed down—this ensures the machine will not
unexpectedly start when connected to power.
4. Connect the machine to the power source.
5. Verify that the machine is operating correctly by
lifting the paddle ON/OFF switch up and turning the
machine ON. The machine should run smoothly with
little or no vibration or rubbing noises.
— Investigate and correct strange or unusual noises
or vibrations before operating the machine further.
Always disconnect the machine from power when
investigating or correcting potential problems.
6. Turn the machine OFF.
7. Remove the switch disabling key, as shown in
Figure.19).
8. Try to start the machine with the paddle switch—the
machine should not start.
— If the machine starts, immediately stop the
machine. The switch disabling feature is not
working correctly. Call Tech Support for help.
Test.Run
Figure.19. Removing switch key from
paddle switch.
Projectiles. thrown. from. the. machine.
could. cause. serious. eye. injury.. Wear.
safety. glasses. to. reduce. the. risk. of.
injury.
Figure.18. Paddle ON/OFF switch location.
Paddle ON/OFF
Switch
Loading ...
Loading ...
Loading ...