Loading ...
Loading ...
Loading ...
-14-
Model W1666/W1685 (For Machines Mfd. Since 2/15)
SETUP
4.. Attach impeller/motor assembly to base plate with
(6) M8-1.25 x 16 hex bolts and (6) 8mm flat washers
(see Figure.7).
Note:.Adjust the position of motor mount to
align holes, then fully tighten fasteners installed
in Step 2 that secure mount to impeller/motor
assembly.
Figure.8. Outlet gasket and flange.
Gasket
Flange
5. Place outlet gasket on top of outlet port, as shown
in Figure.8.
Figure.9. Outlet flange attached.
6. Model.W1666: Place outlet flange on top of gasket
and secure it with (8) M8-1.25 x 16 hex bolts and (8)
8mm flat washers (see Figure.9).
Model.W1685: Place outlet flange on top of gasket
and secure it with (6) M6-1 x 20 hex bolts, (6) 6mm
flat washers, and (6) M6-1 hex nuts.
Figure.7. Impeller/motor assembly
attached to base plate.
x 6
Loading ...
Loading ...
Loading ...