Loading ...
Loading ...
Loading ...
-15-
Model W1666/W1685 (For Machines Mfd. Since 2/15)
SETUP
Figure.10. Locations of separator support
attachment holes in base plate.
Separator Support
Attachment Holes
7. Position each of the three separator supports over
the base plate attachment holes shown in Figure.10,
with top bend facing inward, then secure them with
(6) M8-1.25 x 16 hex bolts and (6) 8mm flat washers
(see Figure.11).
Figure.11. Separator supports attached to
base plate.
x 6
Loading ...
Loading ...
Loading ...