Loading ...
Loading ...
Loading ...
AGRAS T50/T25
Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
27
2. Notification Center
Check notifications about any changes to the aircraft, users, or operations.
3. General Settings
Tap for settings such as units of measurement and privacy settings.
4. Document Management
View planned fields, operation progress, and resources such as prescription maps and
reconstruction ouput. Tap a file to enter Operation View.
5. Log Upload
View solutions for errors of each module and upload error logs.
6. Device Management
Tap to check the device connection status and firmware version.
7. Aircraft Connection Status
Shows if the aircraft is connected to the remote controller.
8. Begin
Tap to enter Operation View.
App Modes
DJI Agras provides two modes to make operating the aircraft accessible to users with any level
of flying experience.
Easy Mode: This mode allows users to perform Route and Fruit Tree operations without
complex parameter settings, which makes operating the aircraft accessible for beginners. In this
mode, the aircraft will RTH by default when the spray tank is empty, RC signal is lost, battery
level is low, or when an operation has been completed.
Standard Mode: In this mode, users can perform Route and Fruit Tree operations, as well as
operate the aircraft manually. In this mode, the aircraft will hover by default when the spray
tank is empty, RC signal is lost, or when an operation has been completed. The low battery
action is set to warning by default.
Follow the steps below to switch the modes:
1. In Operation View, tap the mode switch button on the upper left part of the screen to enter
the task mode selection screen.
2. Check the current operation mode on the upper left part of the screen and tap to select a
different mode on the panel.
Operation View
View the aircraft status, set parameters, switch between operation modes, plan a field, and
perform operations in Operation View.
Slide from the left or right to the center of the screen to return to the home screen. Tap and
hold the icons or buttons in Operation View to check function descriptions. The following
section describes the other displayed information and the setting menu in Operation View.
Loading ...
Loading ...
Loading ...