Loading ...
Loading ...
Loading ...
45
Staying Threshold: When the targets (human/vehicle) staying in the specified area exceed
the threshold, alarms will be triggered.
Counting Reset: The current number of the target counting can be reset. You can choose to
reset the counting daily, weekly or monthly. Click “Reset” to manually reset the current
number of crossing line people/motor vehicle/non-motor vehicle counting.
3. Set alarm trigger options. The setup steps are the same as fire detection. Please refer to
Fire Detection chapter for details.
4. Set the area of the target counting. Click the “Area” tab to go to the interface as shown
below.
Set the alarm line number and direction. Only one alarm line can be added.
Direction：A->B and A<-B can be optional. The direction of the arrow is entrance.
Statistics: If enabled, you can see the statistical information in the live view interface. If
disabled, the statistical information will not be displayed in the live view interface.
The statistical OSD information can be customized as needed.
Click the “Draw Area” button and then drag the mouse to draw a line in the image. Check
“Statistics” and then move the red box to change the position of the statistical information
displayed on the screen. Click the “Stop Draw” button to stop drawing. Click the “Clear” button
to delete the lines.
Click the “Save” button to save the settings.
5. Set the schedule of the target counting. The setup steps of the schedule are the same as
schedule recording setup (See Schedule Recording).
Loading ...
Loading ...
Loading ...