Loading ...
Loading ...
Loading ...
30
5.3 Alarm Configuration
5.3.1 Motion Detection
Go to Alarm→Motion Detection to set motion detection alarm.
1. Check “Enable” check box to activate motion-based alarms. If unchecked, the camera will
not send out any signals to trigger motion-based recording to the NVR or CMS, even if
there is motion in the video.
Alarm Out: If selected, this would trigger an external relay output that is connected to the
camera on detecting a motion- based alarm (some models may support two alarm output
interfaces. Please select alarm out according to the actual situation).
Trigger Audio Alarm: If selected, the warning voice will be uttered on motion detection.
(Please set the warning voice first. See Audio Alarm for details).
Trigger SD Snapshot: If selected, the system will capture images on motion detection and
save the images on an SD card.
Trigger SD Recording: If selected, video will be recorded on an SD card on motion
detection.
Trigger Email: If “Trigger Email” and “Attach Picture “are checked (email address must be set
first in the Email configuration interface), the captured pictures and triggered event will be sent
into those addresses.
Trigger FTP: If “Trigger FTP” is checked, the captured pictures will be sent into FTP server
address. Please refer to FTP configuration chapter for more details.
Loading ...
Loading ...
Loading ...