Geovision GV-TMEB5800 Geovision Thermal Camera User Manual

Loading ...

IMPORTANT:

1. By default, the Administrator’s username is admin and cannot be modified.

2. The camera has two sets of passwords: one is for Web interface and the other is

for the third-party platform connection via ONVIF, e.g. GV-VMS. GV-IP Device Utility

is used to set the ONVIF password. When the first-time user uses GV-IP Device Utility to

set a password for the camera, the two sets of passwords are created simultaneously.

3. To change the password for Web interface, go to Config > Security > User ; see

“Modified User” in 5.6.1 User Configuration. To change the password for ONVIF

connection, go Config > Network > Advnaced; see 5.5.4 ONVIF.

4. If the first-time user accesses the camera’s Web interface on the browser directly by

using the IP address found in GV-IP Device Utility, the following dialog box will apear.

If “Activate Onvif User” is enabled, the ONVIF user can be activated simultanously for the

third-party platform connection via ONVIF, using the default username and set password set

above to connect.

Loading ...

Geovision GV-TMEB5800 5MP AI Thermal & Optical IR Eyeball Dome Camera