FLUKE 1586A/2HC/C User Manual for the Fluke 1586A/2HC/C Super-DAQ Precision Temperature Scanner with high-capacity module

Loading ...

1586A

Users Manual

3-26

Set up a totalizer channel as follows (see Table 3-9):

1. Connect the wire to the TOT terminal of the plug then insert the plug into the rear-

panel DIO/TOT port.

2. Set the channel to ON (see “Set Channels to ON or OFF” on page 3-12). When the

channel is set to ON, a channel configuration sequence shows on the display that

steps the user through an initial configuration sequence as shown in Table 3-9. If the

channel was previously configured, push  to cancel the configuration sequence

to use the last channel configuration.

3. Use the information in Table 3-9 to configure the totalizer channel. Push  or  to

highlight the channel setting then push  to edit the setting.

4. To see the totalizer count, monitor Ch402 in the Scan/Monitor menu.

Table 3-9. Totalizer Channel Configuration

hcn022.eps

Item Function

 Input a custom alpha-numeric label to help identify the channel (optional).

 Read mode selection. See “Read Mode” on page 3-25.

 Set the Debounce feature to ON or OFF. See “Debounce” on page 3-25.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 1586A/2HC/C Super-DAQ Precision Temperature Scanner with high-capacity module