Loading ...
Loading ...
Loading ...
Measure/DMM Operation
Introduction 5
5-3
Introduction
This chapter supplies instructions on how to operate the Measure/DMM function of the
Product.
About the Measure Function
The Measure function lets the user quickly measure a single channel. To use this
function, push on the front panel. The Measure function operates similarly to the
Monitor function and has the same graphing and statistic features. For information on
how to use this function, refer to the instructions in the Monitor section in Chapter 4.
To use the Measure function, channels must first be configured in Channel Setup (see
Chapter 3). Any channel configured and turned on in Channel Setup can be quickly
selected for measurement in Measure mode. The selected channel is then measured
continuously. Trigger sources are ignored.
About the DMM Function
The DMM is a digital multimeter feature lets users quickly connect test leads to the front-
panel to make voltage, resistance, current, and temperature measurements. It is not
necessary to configure the front channel in Channel Setup to use the DMM function. To
use this function, push
then . To return to the Measure function, push to
show the Options menu, then push
. As these measurements are taken, these
measurements values are shown on the screen and can also be recorded to file. These
recorded files are referred to as DMM Data files.
Note
The DMM function is an individual function of the Product that does not
read or share configuration information with channel 001 in the channel
list. For example, use of the DMM feature does not automatically configure
and set channel 001 to ON in the Channel Setup menu.
Figure 5-1 shows an example of a front-panel input configuration.
X
hcn013.eps
Figure 5-1. Example Voltage Front-Panel Connection
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...