1. Home
  2. BAUMR-AG
  3. BAUMR-AG CHNSHP03KBMRADJG User Manual

BAUMR-AG CHNSHP03KBMRADJG Electric Chainsaw Sharpener Grinder 350W

Product's Documents

Below are documents related to this product, you can read online or download:
Main documentSpecificationQuestions and answersRelateds Products
CHNSHP03KBMRADJG photo

Product manual

This is the main product document for model CHNSHP03KBMRADJG.

The file format is pdf, 17 pages, you can download this manual here .

background
E&OE © 2023 Baumr-AG
Chainsaw Sharpener
User Manual
[Revision 4.0 May 2023]
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE
AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may
vary in appearance, assembly, inclusions, specifications, description, and packaging.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 2
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you do
not follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you do
not follow instructions.
You CAN be INJURED if you do
not follow instructions or equipment
damage may occur.
It is vital that you read and understand this
user manual before using the product,
including safety warnings, and any assembly
and operating instructions. Keep the manual
for future reference.
Safety precautions and recommendations
detailed here must be fully understood and
followed to reduce the risk of injury, fire,
explosion, electrical hazard, and/or property
damage.
Safety information presented here is generic
in nature – some advice may not be
applicable to every product. The term
"equipment" refers to the product, be it
electrical mains powered, battery powered or
combustion engine powered.
• Before Use - If you are not familiar with the
safe operation/handling of the equipment or
are in any way unsure of any aspect of
suitability or correct use for your
application, you should complete training
conducted by a person or organization
qualified in safe use and operation of this
equipment, including fuel/electrical handling
and safety.
• Do NOT operate the equipment in
flammable or explosive environments, such
as in the presence of flammable liquids,
gases or dust. The equipment may create
sparks or heat that may ignite flammable
substances.
• Keep clear of moving parts.
• Equipment may be a potential source of
electric shock or injury if misused.
• Do NOT operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
• Do NOT allow others to use the equipment
unless they have read this manual and are
adequately trained.
• Keep packaging away from children - risk
of suffocation! Operators must use the
equipment correctly. When using the
equipment, consider conditions and pay
due care to persons and property.
General Work Area Safety
• Work areas should be clean and well it.
• Do not operate the equipment if
bystanders, animals etc are within
operating range of the equipment or the
general work area.
• If devices are provided for connecting dust
extraction / collection facilities, ensure
these are connected and used properly.
Dust collection can reduce dust-related
hazards.
General Personal Safety
• Wear appropriate protective equipment
when operating, servicing, or when in the
operating area of the equipment to help
protect from eye and ear injury, poisoning,
burns, cutting and crush injuries. Protective
equipment such as safety goggles,
respirators, non-slip safety footwear, hard
hat, hearing protection etc should be used
for appropriate equipment / conditions.
Other people nearby should also wear
appropriate personal protective equipment.
Do not wear loose clothing or jewellery,
which can be caught in moving parts. Keep
hair and clothing away from the equipment.
• Stay alert and use common sense when
operating the equipment. Do not over-
reach. Always maintain secure footing and
balance.
• Do not use the equipment if tired or under
the influence of drugs, alcohol or
medication.
• This equipment is not intended for use by
persons with reduced physical, sensory or
mental capabilities.
General Fuel Safety
• Petrol/fuel/gasoline is extremely flammable
– keep clear of naked flames or other
ignition sources.
• Do not spill fuel. If you spill fuel, wipe it off
the equipment immediately – if fuel gets on
your clothing, change clothing.
• Do NOT smoke near fuel or when
refuelling.
• Always shut off the engine before
refuelling.
• Do NOT refuel a hot engine.
• Open the fuel cap carefully to allow any
pressure build-up in the tank to release
slowly.
• Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel
leakage is found, do not start or run the
engine until all leaks are fixed.
General Carbon-Monoxide Safety
• Using a combustion engine indoors CAN
KILL IN MINUTES. Engine exhaust
contains carbon-monoxide – a poison you
cannot smell or see.
• Use combustion engines OUTSIDE only,
and far away from windows, doors and
vents.
General Equipment Use and Care
• The equipment is designed for domestic
use only.
• Handle the equipment safely and carefully.
• Before use, inspect the equipment for
misalignment or binding of moving parts,
loose components, damage or any other
condition that may affect its operation. If
damaged, have the equipment repaired by
an authorised service centre or technician
before use.
• Prevent unintentional starting of the
equipment - ensure equipment and power
switches are in the OFF position before
connecting or moving equipment. Do not
carry equipment with hands or fingers
touching any controls. Remove any tools or
other items that are not a part of the
equipment from it before starting or
switching on.
• Do not force the equipment. Use the
correct equipment for your application.
Equipment will perform better and be safer
when used within its design and usage
parameters.
• Use the equipment and accessories etc. in
accordance with these instructions,
considering working conditions and the
work to be performed. Using the equipment
for operations different from those intended
could result in hazardous situations.
• Always keep equipment components
(engines, hoses, handles, controls, frames,
housings, guards etc) and accessories
(cutting tools, nozzles, bits etc) properly
maintained. Keep the equipment clean and,
where applicable, properly lubricated.
• Store the equipment out of reach of
children or untrained persons. To avoid
burns or fire hazards, let the equipment
cool completely before transporting or
storing. Never place or store the equipment
near flammable materials, combustible
gases or liquids etc.
• The equipment is not weather-proof, and
should not be stored in direct sunlight, at
high ambient temperatures or locations that
are damp or humid.
• Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
• For specific equipment safety use and care,
see Equipment Safety.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 3
General Electrical Safety
• Inspect electrical equipment, extension
cords, power bars, and electrical fittings for
damage or wear before each use. Repair or
replace damaged equipment immediately.
• Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting or
disconnecting equipment.
• When wiring electrically powered
equipment, follow all electrical and safety
codes.
• Wherever possible, use a residual current
device (RCD).
• High voltage / high current power lines may
be present. Use extreme caution to avoid
contact or interference with power lines.
Electrical shock can be fatal.
General Electrical Safety
• Electrically grounded equipment must have
an approved cord and plug and be
connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and
operate equipment by connecting and
disconnecting the electrical cord.
• Do NOT use equipment that has exposed
wiring, damaged switches, covers or
guards.
• Do NOT use electrical equipment in wet
conditions or in damp locations.
• Do NOT use electrical cords to lift, move or
carry equipment.
• Do NOT coil or knot electrical cords, and
ensure electrical cords are not trip hazards.
General Service Information
• The equipment must be serviced or
repaired at authorised service centres by
qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to ensure
equipment safety is maintained.
• Do NOT attempt any maintenance or repair
work not described in this manual.
• After use, the equipment and components
may still be hot – allow the equipment to
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before adjusting, changing
accessories or performing repair or
maintenance.
• Do NOT adjust while the equipment is
running.
• Perform service related activities in suitable
conditions, such as a workshop.
• Replace worn, damaged or missing
warning/safety labels immediately.
Chainsaw Sharpener Safety
Chainsaw sharpeners can be dangerous when used improperly. Please observe basic safety precautions to eliminate risk of fire, electric shock and
personal injuries.
• Familiarise yourself with the sharpener before use.
• Only use the sharpener for the application if which it is designed.
• Mount the sharpener on a non-skid and level ground.
• Ensure that you stand securely and maintain your balance at all times.
• Be attentive and be careful of what you do. One moment of carelessness when using the device can result in serious injuries.
• Do not use the device when you are tired or under the influence of drugs or alcohol.
• Wear suitable work clothes!
• Do not wear loose-fitting clothes or jewellery that can get caught in moving parts.
• Wear gloves and slip-proof shoes.
• Wear a hairnet if your hair is long.
• Wear protective clothing.
• Safety goggles
• Ear protection (sound intensity level at workplace can exceed 78 dB (A))
• Dust mask
• Keep your workplace in an orderly condition.
• Take into consideration the environmental influences:
• Do not use the device in moist or wet conditions.
• Do not expose the chainsaw sharpener to rain.
• Only work with sufficient visibility conditions. Provide good illumination.
• Never leave the machine unattended.
• Persons under the age of 18 must not operate the device.
• Do not allow other people, especially children, to touch the sharpener.
• Keep them away from your working area.
• Do not overload the machine!
• Only operate the machine with complete and correctly attached safety equipment.
• Do not use any grinding wheels which do not comply with the indicated characteristics of this instruction manual.
• Worn and defective grinding wheels (cracks, imbalance, chipping, etc.) must be replaced immediately.
• Switch the machine off and remove the mains plug from the socket when:
• Carrying out repairs
• Maintenance and cleaning
• Storage
• Leaving the chainsaw sharpener (even in case of short-term interruptions)
• Maintain your chainsaw sharpener with care:
• Keep the sharpener free of oil and grease.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 4
• Follow the maintenance instructions and the instructions for tool exchange.
• Check the machine for possible damage:
• Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly for their intended function.
• Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. All parts must be properly mounted,
and all conditions met to ensure the flawless operation of the chainsaw sharpener.
• Unless otherwise, indicated in the operating instructions, damaged safety devices and parts must be properly repaired by an authorised
workshop.
• Damaged or illegible safety warning labels should be replaced immediately.
• Do not allow any tool key to be plugged in!
Before switching on, check always that wrenches and adjusting tools are removed.
• Store unused equipment in a dry, locked place out of reach of children.
Electrical Safety
• Long and thin connection lines will result in a potential drop.
• Plugs and coupler outlets on connection cables must be made of rubber, non-rigid PVC or other thermoplastic material of the same mechanical
stability.
• The connector of the connection cable must be splash-proof.
• When running the connection line, make sure it is neither bent or stretched
• Never run the sharpener with a wet plug connection
• Wind the cable completely when using a cable drum.
• Only use the cable as it was intended.
• Protect the cable against heat, oil and sharp edges.
• Do not use the cable to pull the plug from the socket.
• Protect yourself against electric shocks. Avoid touching earthed parts (e.g. pipes, heating apparatus, cooker, fridges etc.)
• Regularly check the extension cables and replace them if they are damaged.
• Do not use any defective connection cables.
• Do not set up any provisional electrical connections.
• Never bypass protective devices or deactivate them.
• The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or by a representative of the
manufacturer.
• Use only original spare parts, accessories, and special accessory parts. Accidents can arise for the user through the use of other spare parts.
The manufacturer is not liable for any damage or injury resulting from such action.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 5
Safety Symbols
The product may have safety warning labels attached to it, explained below. Understand the symbols on your
product and their meanings. If any stickers become unreadable, unattached etc., replace them.
Flammable Material Hazard
Flammable liquids, gases or
substances etc may present.
Avoid ignition sources and open
flames. Danger of fire.
Read User Manual
Read and fully understand
product safety warnings,
operation, procedures etc before
using the product.
Use Hand Protection
Wear appropriate hand protection
and take due care as the product
or use of the product may present
hand hazards.
Carbon-Monoxide Hazard
Do not use the product in
confined areas or without
adequate ventilation. Carbon-
monoxide poisoning can be fatal.
Electrocution / Electrical Shock
Hazard
High voltage or high current
electricity may be present or
required by the product. Take
due care when handling electrical
products, cables, plugs and
leads. Electrical shock can be
fatal.
Toxic Fumes / Dust Hazard
Using the product or by-products
from use may produce fumes,
smoke or particles that could be
harmful if inhaled. Wear
appropriate breathing protection
and have adequate ventilation.
Explosive Material Hazard
Combustible liquids, gases or
substances etc may be present.
Avoid ignition sources and open
flames. Danger of explosion.
Cutting / Amputation Hazard
The product may have blades,
edges or mechanical devices that
can cause severe cut injury to
fingers, limbs etc. Take due care
when handling and using the
product.
Crush Hazard
The product may have blades,
edges or mechanical devices that
can cause severe crush injury to
fingers, limbs etc. Take due care
when handling and using the
product.
Single Operator Only
The product must be operated by
a single person only. More than
one person operating the product
may introduce additional hazards.
Use Face Protection
Wear appropriate full-face
protection and take due care as
the product or use of the product
may present face and eye
hazards.
Use Foot Protection
Wear appropriate foot protection
and take due care as the product
or use of the product may present
foot hazards.
Use Eye / Ear / Head Protection
Wear appropriate eye and / or
ear and / or head protection and
take due care as the product or
use of the product may present
eye, hearing and head hazards.
Running Hazard
Do not run on or near the product
as doing so may present a fall
hazard.
Diving Hazard
Do not dive into the product as
doing so may present a neck /
head injury hazard.
Adult Supervision Required
Always supervise children and
other users of a product to
prevent drowning or injury.
Skin Penetration / Puncture
Hazard
The product may produce
pressure, emit liquids or objects
that can cause severe injury to
fingers, limbs, blood etc. Take
due care when handling and
using the product.
Hot Surface Hazard
Be aware that the product may
produce high temperatures and
hot surfaces that can cause burn
injuries.
Flying Debris Hazard
Be aware that the product or use
of the product may present
hazards produced by flying
debris. Wear appropriate clothing
and protective devices.
Moving Parts Hazard
Be aware that the product
contains or uses mechanical
devices that move or rotate.
Always wait for moving parts to
stop fully before handling the
product, adjusting, maintenance
etc.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 6
Carbon-Monoxide Hazard
Do not use the product in
confined areas or without
adequate ventilation. Carbon-
monoxide poisoning can be fatal.
Pull Hazard
Be aware that the product
contains or uses mechanical
devices that can pull in objects
and can cause severe injury to
fingers, limbs etc. Take due care
when handling and using the
product.
Slope / Fall Injury Hazard
Be aware that using the product
on sloping surfaces or in slippery
conditions may present additional
dangers from falls and contact
with blades, moving parts, hot
surfaces etc.
"Slam Dunk" Warning
Do NOT attempt "slam dunk"
manoeuvres as this may result in
severe injury due to falling,
product breakage or collapse etc.
Electrocution / Electrical Shock
Hazard - Outdoor
High voltage or high current
electricity may be present or
required by the product. Do NOT
use in rain, damp or wet
conditions. Electrical shock can
be fatal.
Electrocution / Electrical Shock
Hazard - Disconnect
High voltage or high current
electricity may be present or
required by the product. Always
disconnect the product from the
electrical supply before handling
the product, adjusting,
maintenance etc.
Power Line Electrocution
Hazard
High voltage / high current power
lines may be present. Use
extreme caution to avoid contact
or interference with power lines.
Electrical shock can be fatal.
"Kick-Back" Hazard
High level of "kick-back" hazard
that can cause the machine to
suddenly rotate towards operator.
Kick-back injury can be fatal.
Winch Operator Position
Hazard
Do NOT stand between winch
and load. Do NOT use winch to
move people.
Winch Lift Hazard
Do NOT LIFT load vertically. Use
machine to PULL only.
Cable Hazard
Ensure that load bearing cable is
not kinked or knotted.
Winch Cable Hazard
Ensure that there is a minimum
number of cable coils on
winching mechanism.
Winch Hook Hazard
Carry hook to load – do NOT
throw or run.
Flash / Blinding Hazard
Wear appropriate eye protection
for welding. Direct exposure to
weld arcs may cause permanent
eye injury.
Laser Hazard
Laser may be in use – do NOT
look directly at laser or allow
others to.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 7
Table of Contents
Safety ............................................................................................................................................................. 2
Safety Symbols ........................................................................................................................................................... 5
Parts Identification ....................................................................................................................................... 8
Assembly ....................................................................................................................................................... 9
Grinding ....................................................................................................................................................... 12
Grinding Depth Delimiter .......................................................................................................................................... 13
Dimensions ................................................................................................................................................. 14
Specifications ............................................................................................................................................. 16
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG
Parts Identification
No. Name No. Name
1
Hand piece
8
Cutting angle setting wheel
2
Grinding disk lateral guard
9
Scale
3 Depth of grind set screw 10 Mounting screw (10a/10b)
4 Cutting edge angle set-up wheel 11 Guide plate
5 Base 12 Chain stop
6 Guide screw 13 Grinding disk
7
Rotary table
14
Grinding disk protective enclosure
Spare parts available
for purchase, scan QR
code below:
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 9
Assembly
The assembly should be performed with the machine unplugged.
The chainsaw sharpener is delivered pre-assembled. It consists of the base, on which the chain guide is located
and the bearing arm with the motor and handgrip.
The sharpener is suited for both desk installation and wall mounting. When installing it on the desk, put the
machine on the edge of the desk and screw it to the desk using the holes in the base.
When mounting on the wall, use the respective holes in the vertical part of the base (there should be a
maintained distance from the wall or alternately spacers can be used to gain access to the rear set screw).
After the desk installation, fit the arm in the base by inserting the pilot pin and securing it with a hexagonal screw
(Fig. 1).
It is possible to fit a washer on the rear side screw and screw the setting wheel on. (Fig. 2).
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 10
Screw the supporting arm control holder on the screw in the grinding disk body. (Fig. 3).
Fit the grinding disk enclosure in using the supplied screws and a respective wrench. (Fig. 4).
When mounting on the wall, carefully mount the machine at a height of 120-130 cm from the floor to avoid
working at eye height!
To be able to install the disk, unscrew the auxiliary flange. (Fig. 5).
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 11
After you have removed the ancillary flange, you can insert the grinding disk in the body from below. See that
the ancillary flange and the disk abut against each other precisely. (Fig. 6).
Do not tighten the screws too much to avoid damaging to the disk. The grinding disk on the hub torque is 7 Nm;
you can adjust it using a torque spanner. Now, the grinding disk additional guard should be fitted on (Fig. 7).
Check the correct bottoming of the disk: it should not move across and lengthwise. With the grinding disk
properly installed, a trial may be performed.
If the grinding disk is vibrating or shows otherwise wobbling, switch off and unplug the machine before you
attempt in clearing the fault.
The machine has a zero-voltage circuit breaker, which is disabled on outage and will prevent any restarting of
the machine after the power supply is restored.
Using the sharpening stone and a clamping plate, it is possible to sharpen the disk to obtain the required profile.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 12
Grinding
Before the start of grinding, the chain should be conducted between both the attachment guides. The sharpening
angle must correspond to the guide’s position.
The type of chain to be sharpened can be determined using the sharpening block provided on the dimension
table.
Loosen the mounting screw (10b) and place the cutting chain in the guide rail between the guide plate (Fig. 8).
Fold the chain stop (Fig.9) down and pull the chain toward the back until the cutting link rests against the stop.
Set the top plate angle by means of the set screw (P.2, P.4); you can also use the scale to set the angle. The
vice angle should be setup by the set screw.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 13
With the clamping screw adjusted and the vice angle setup (RH and LH teeth are different) and pre-set to the top
plate angle, set the distance with the help of the mounting screw (10a), lead the grinding disk down to the tooth
by soft pushing the supporting strut. The grinding depth may be set by the set screw (K).
Tighten the mounting screw (10b); and after this you may switch the sharpener on. The chainsaw sharpening
may be started by gently pushing on the grinding disk. Adjust the pressure as necessary. Mark the start of
grinding with a piece of chalk and grind all the teeth in one direction, then turn the clamping screw, minding the
angle, and grind the teeth in the opposite direction.
With warn chains, the lateral guide position should be set at an angle where the grinding disk can’t touch the
guide.
While operating the sharpener, avoid strong thrusting as the teeth might collide and cause excessive wear and
tear of the chain.
Grinding Depth Delimiter
The size of the depth delimiter can be determined by the table on the next page. When you are grinding the
depth delimiter, the screw clamp position should always be at a rate of 0. Set the supporting strut and holder at
90 degrees. The grind depth can be set using the set screw K.
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 14
Dimensions
Chain
Pitch
Gauge Oregon Stihl Sandvik Carlton
Vise
Angle
Top
Plate
Angle
Tilt
Angle
Wheel
Width
Depth
Gauge
1/4”
0.050”/1.
3mm
25AP 13RM 50K 30 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.050”/1.
3mm
20LP 23RS 50JLG K1L 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.058”/1.
5mm
21LP 25RS 58JLG K2L 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.063”/1.
6mm
22LP 26RS 63JLG K3L 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.050”/1.
3mm
20BP 23RM 50JLG K1C 30 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.058”/1.
5mm
21BP 25RM 58JLG K2C 30 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.063”/1.
6mm
22BP 26RM 63JLG K3C 30 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.050”/1.
3mm
95VP K1N 30 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.050”/1.
3mm
95R 5 ⁰ 50 ⁰ 10 ⁰ 1/8”3.2mm
0.030”/0.
76mm
0.325”
0.058”/1.
5mm
M21LP 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
0.325”
0.063”/1.
6mm
M22LP 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
3/8”
0.050”/1.
3mm
72LG 33RS 50AL A1LM 25 ⁰ 60 ⁰ 10 ⁰ 1/8”3.2mm
0.025”/0.
63mm
3/8”
0.058”/1.
5mm
73LG 35RS 58AL A2LM 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.063”/1.
6mm
75LG 36RS 63AL A3LM 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.050”/1.
3mm
72LP 33RS 50AG A1L 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.058”/1.
5mm
73LP 35RS 58AG A2L 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.063”/1.
6mm
75LP 36RS 63AG A3L 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.050/1.3
mm
72DP 33RMI A1EP 35 ⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.058”/1.
5mm
73DP A2EP 35 ⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.063”/1.
6mm
75DP 36RMI A3EP 35 ⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.050”/1.
3mm
72RD 10 ⁰-15 ⁰ 50 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.058”/1.
5mm
73RD 10 ⁰-15 ⁰ 50 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.063”/1.
6mm
75RD 36RMX 10 ⁰-15 ⁰ 50 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 15
Chain
Pitch
Gauge Oregon Stihl Sandvik Carlton
Vise
Angle
Top
Plate
Angle
Tilt
Angle
Wheel
Width
Depth
Gauge
3/8”
0.058”/1.
5mm
M73LP 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8”
0.063”/1.
6mm
M75LP 25 ⁰ 60 ⁰ 10 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8 (90)
0.043”/1.
1mm
90SG 63PMN N4C 30 ⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.020”/0.
50mm
3/8 (91)
0.050”/1.
3mm
91VS 63PM 50R N1C 30 ⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8 (91)
0.050”/1.
3mm
91VG 63PMI 50RG NIC-BC 30⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
3/8 (91)
0.050”/1.
3mm
91R 63PMX 5⁰ 60 ⁰ 0 ⁰
1/8”3.2mm-
3/16”/4.7mm
0.025”/0.
63mm
0.404”
0.058”/1.
5mm
581 B2LM 25⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.025”/0.
63mm
0.404”
0.063”/1.
6mm
591 B3LM 25⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.025”/0.
63mm
0.404”
0.058”/1.
5mm
26/P 58B B2EP 35⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.030”/0.
76mm
0.404”
0.063”/1.
6mm
27/P 46RSE 63B B3EP 35⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.030”/0.
76mm
0.404”
0.063”/1.
6mm
59AC 46RM 63BC B3S 35⁰ 60 ⁰ 0 ⁰ 3/16”/4.7mm
0.030”/0.
76mm
0.404”
0.63”/1.6
mm
27R 46RMX 63BR B3RM10 10 ⁰-15 ⁰ 50 ⁰ 10 ⁰ 3/16”/4.7mm
0.030”/0.
76mm
0.404”
0.63”/1.6
mm
16H 46RMH HC B3M 35⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.050”/1.
27mm
0.404”
0.080”/2.
0mm
18H 49RMH 2HC B3M 35⁰ 60 ⁰ 10 ⁰ 3/16”/4.7mm
0.050”/1.
27mm
3/4”
0.122”/3.
1mm
11H G7S 35⁰ 60 ⁰ 10 ⁰ 1/4”/6mm
0.050”/1.
27mm
background
Chainsaw Sharpener
E&OE © 2023 Baumr-AG 16
Specifications
Operating Voltage
220-240V
Rated Power
230W
Max Power Output
350W @ 50% Duty Cycle
Main Voltage
220-240V
Maximum Motor RPM
3000RPM
Maximum Cutting Length
250mm
Vice Capacity
0.80" TO 0.50"
Light Wattage
35W
Maximum working angle
35 Degrees Left to Right
Grinding Disc Size
145 x 3.2 x 22.3mm Arbor
Approvals
CE, GS, C-TICK, EMC
background
Some experts believe that the incorrect or prolonged use of almost any
product may cause serious injury or death. To help reduce your risk of
serious injury or death, refer to the information below. For more information,
see www.datastreamserver.com/safety
Consult all documentation, packaging
and product labelling before use. Note
that some products feature
documentation available online. It is
recommended to print and retain the
documentation.
Before each use, check the product for
loose/broken/damaged/missing parts,
wear or leaks (if applicable). Never use a
product with
loose/broken/damaged/missing parts,
wear or leaks.
Products must be inspected and serviced
(if applicable) by a qualified technician
every 6 months. This is based on
average residential use by persons of
average size and strength, and on a
property of average metropolitan size.
Use beyond these recommendations may
require more frequent
inspections/servicing.
Ensure that all users of the product have
completed a suitable industry recognised
training course before being allowed
access to the product.
The product has been supplied by a general merchandise
retailer that may not be familiar with your specific
application or description of application. Be sure to attain
third-party approval from a qualified specialist for your
application before use, regardless of any assurances from
the retailer or its representatives.
This product is not intended for use where fail-safe
operation is required. As with any product (for example,
automobile, computer, toaster), there is the possibility of
technical issues that may require the repair or
replacement of parts, or the product itself. If the possibility
of such failure and the associated time it may take to
rectify could in any way inconvenience the user, business
or employee, or financially affect the user, business or
employee, then the product is not suitable for your
requirements. This product is not intended for use where
incorrect operation or a failure of any kind, including but
not limited to, a condition requiring product return,
replacement, parts replacement or service by a technician
may cause financial loss, loss of employee time or an
inconvenience requiring compensation.
If this product has been purchased in error when
considering the information presented here, contact the
retailer directly for details of their returns policy, if
required.
©2023 Baumr-AG. All rights reserved. No part of this document, including descriptive content, concepts,
ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,
without express permission or consent from the publisher.

Specifications

Indexed Terms: Electric Chain Saw

BAUMR-AG CHNSHP03KBMRADJG Questions and Answers

Find answers or ask new question.
See other models: CHNSAWBMRA6X2 BLWVCBBMRA420 BAJHTL01A TOLCLSBMRAMF3 BMCRTL00A
Questions and Answers