Loading ...
Loading ...
Loading ...
11. Install the new filter and rotate it clockwise by hand until the filter gasket
contacts the sealing surface, then turn it an additional 3/4 turn.
12.Remove the dipstick. Add the proper amount of the recommended oil. Do not
overfill.
13.Reinstall the dipstick.
14.Place the transmission in PARK.
15.Lock the parking brake.
16.Start the engine. Allow it to idle for one to two minutes.
17.Stop the engine.
18.Check for leaks.
19.Check the oil level. Add oil as needed to bring the level to the upper mark on
the dipstick.
20.Dispose of used filter and oil properly.
TRANSMISSION OIL
Always check and change the
transmission oil at the intervals
outlined in the Maintenance
Interval Chart. See the
Lubrication Guide section for
fluid recommendations,
capacities, and plug torques.
Maintain the oil level at the
bottom of the fill plug hole
q
.
The fill plug is located on the right side of the ATV behind the footwell. The drain
plug
w
is located on the bottom rear side of the gearcase.
OIL CHECK
1. Remove the footwell.
2. Remove the fill plug. Check the oil level.
3. Add the recommended fluid as needed to bring the level to the bottom of the
fill hole threads.
97
MAINTENANCE
Loading ...
Loading ...
Loading ...