Loading ...
Loading ...
Loading ...
1. Remove the upper headlight pod.
2. Loosen the four handlebar bolts.
3. Adjust the handlebar to the desired height. Be sure the handlebars do not
contact the gas tank or any other part of the machine when turned fully to the
left or right.
4. Torque the front two bolts to specification, then torque the rear two bolts. A
gap of up to 1/8" (3 mm) will remain at the rear of the clamp blocks.
TORQUE
Handlebar Bolts:
20 ft-lbs (27 N·m)
5. Reinstall the headlight pod.
NOTICE
Test for full, free range of motion by turning the handlebars side to side.
138
MAINTENANCE
Loading ...
Loading ...
Loading ...