Loading ...
Loading ...
Loading ...
Figure 5-6 Line Crossing Detecon
3.
Select a camera.
4.
Check Enable Line Crossing Detecon.
5.
Set the line crossing detecon rules and detecon areas.
1) Select an Arming Area.
2) Select Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. When an object goes across the congured line with
both direcons can be detected and alarms are triggered.
A->B
Only the object crossing the congured line from the A side to the B side can be detected.
B->A
Only the object crossing the congured line from the B side to the A side can be detected.
3) Set the detecon sensivity. The higher the value is, the more easily the detecon alarm can
be triggered.
4) Check Target Detecon as Human or Vehicle. Only the target of selected type will trigger the
alarm.
5) Click Draw Area.
6) Draw a virtual line in the preview window.
7) Set the Max. Size and Min. Size for valid target object size. Targets smaller or larger than the
valid target size will not trigger detecon.
6.
Set the arming schedule. Refer to
Congure Arming Schedule .
7.
Set linkage acons. Refer to Congure Linkage Acons .
8.
Click Apply.
Digital Video Recorder User Manual
70
Loading ...
Loading ...
Loading ...