Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42793502-ds-7316huhi-k4/bg8b.png)
Note
●
You can use the default port No., or change it according to actual requirements.
●
External Port indicates the port No. for port mapping in the router.
●
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of
the other ports should be between 1 and 65535 and the value must be dierent from each
other. If mulple devices are congured for the UPnP™ sengs under the same router, the
value of the port No. for each device should be unique.
4.
Enter the virtual server seng page of router; ll in the blank of Internal Source Port with the
internal port value, the blank of External Source Port with the external port value, and other
required contents.
Note
●
Each item should be corresponding with the device port, including server port, hp port, RTSP
port and hps port.
●
The virtual server seng interface below is for reference only, it may be dierent due to
dierent router manufactures. Please contact the manufacture of router if you have any
problems with seng virtual server.
Figure 10-3 Set Virtual Server Item
10.4 Congure Wi-Fi
You can use a Wi-Fi dongle to connect your device to a wireless network. Only certain models
support this funcon.
Before You Start
Prepare a suitable Wi-Fi dongle, and insert it in to the USB interface at the rear panel.
Steps
1.
Go to System → Network → TCP/IP → Wi-Fi .
Digital Video Recorder User Manual
115
Loading ...
Loading ...
Loading ...