Loading ...
Loading ...
Loading ...
12.8 Restore Default Sengs
Steps
1.
Go to Maintenance → Default .
Figure 12-19 Restore Default Sengs
2.
Select the restore type from the following three opons.
Restore Defaults
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default sengs.
Factory Defaults
Restore all parameters to the factory default sengs.
Restore to Inacve
Restore the recorder to inacve status.
Note
The recorder will reboot automacally aer restoring to the default sengs.
12.9 Security Management
Note
The funcons in this secon are only available for certain models.
12.9.1 Congure ONVIF
ONVIF protocol allows the connecon with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Digital Video Recorder User Manual
150
Loading ...
Loading ...
Loading ...