Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42793502-ds-7316huhi-k4/bg75.png)
6.4.3 Nofy Surveillance Center
The device can send an excepon or alarm signal to the remote alarm host when an event occurs.
The alarm host refers to the PC installed with client soware (e.g., iVMS-4200, iVMS-5200).
Steps
1.
Go to System → Network → Advanced → More Sengs .
2.
Set the alarm host IP and alarm host port.
3.
Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, video tampering,
face detecon, etc.).
4.
Select Nofy Surveillance Center.
6.4.4 Congure Email Linkage
The system can send an email with alarm informaon to a user or users when an alarm is detected.
Steps
1.
Go to System → Network → Advanced → Email .
2.
Set the email parameters.
3.
Click Apply.
4.
Go to the Linkage Acon interface of the alarm detecon (e.g., moon detecon, video
tampering, face detecon, etc.).
5.
Select Send Email alarm linkage acon.
6.4.5 Trigger Alarm Output
The alarm output can be triggered by the alarm input, moon detecon, video tampering
detecon, face detecon, line crossing detecon, and any all other events.
Steps
1.
Go to Linkage Acon of the alarm detecon (e.g., moon detecon, face detecon, line crossing
detecon, intrusion detecon, etc.).
2.
In Trigger Alarm Outputs, select the alarm output(s) to trigger.
3.
Go to System → Event → Normal Event → Alarm Output .
4.
Select an alarm output item from the list.
6.4.6 Congure PTZ Linkage
The system can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event, or
VCA detecon events occurs.
Before You Start
Make sure the connected PTZ or speed dome connected supports PTZ linkage.
Digital Video Recorder User Manual
93
Loading ...
Loading ...
Loading ...