Loading ...
Loading ...
Loading ...
22
INSTALLATION
Contact DCS at www.dcsappliances.com if any of the listed items are missing. Please be prepared
with your model #, serial # and description of item(s) that are missing.
IMPORTANT!
Read all installation instructions in this manual to see if the unit has been correctly installed. Ensure
that installation has been completed correctly before use.
Tag location of
model # and serial #
Installer Checklist
Specified clearances
maintained to
combustibles.
Verified proper
enclosure ventilation.
All internal packaging
and any adhesive residue
removed. To remove
stubborn residue, use
rubbing alcohol or a
commercially available
adhesive remover.
Removed shipping bracket.
Knobs turn freely,
bezels centered.
Each burner lights
satisfactorily - individually
or with adjacent burner lit.
Air shutters adjusted.
Low flame setting
satisfactory.
Drip pan in place properly
and sliding freely.
Pressure regulator
connected and set for
4.0” C.E. Natural, 11.0” C.E.
LP gas.
Manual shut-off valve
installed and accessible.
Unit tested and free
of leaks.
User informed of gas
supply shut-off
valve location.
All radiant trays are
assembled and put in place.
Check match lighting.
Sear burner models: ensure
mesh is in place.
Please leave these
instructions with the user.
User, please retain
these instructions for
future reference.
Product rating plate,
on underside of
drip tray
Loading ...
Loading ...
Loading ...