12V TYRE INFLATOR WITH WORKLIGHT
MODEL NO: MAC12D
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. SAFETY
9 Read the manual before using this product. Thoroughly understand operating procedures, safety warnings and maintenance
requirements. Keep the manual in a convenient place for all users to see and use. Keep labels as per original.
9 The compressor only operates with a 12-volt electrical system.
9 Consult your vehicle’s manual or a qualied mechanic for proper connection procedure.
9 After 30 minutes of continuous operation, allow the unit to cool before restarting.
9 Damage can occur from continued overuse.
9 The compressor was permanently lubricated during assembly. DO NOT add oil or any other lubricant.
9 The unit will become HOT after using for a long period of time. When used for a long period of time, the compressed air hose and
device may become noticeably warm.
9 There is a risk of burn injuries! Allow the mini compressor to cool down suciently before storing.
9 Please use caution when touching the unit in order to avoid burns.
9 Only inate tyres to the manufacturer’s recommended pressure. DO NOT over inate as serious injury could occur.
9 Keep the unit away from small children.
9 Clean with a damp cloth only. DO NOT use chemicals or soap.
8 DO NOT use the unit for pumping any gas or liquid other than air.
9 The unit is not designed for use as a source for breathable air.
9 The unit is designed for use with car tyres. It is not designed for use with large tyres like tractor or truck tyres.
8 DO NOT use (or modify) the tool for any other purpose than that for which it was designed.
9 Use extra caution when inating small objects like bicycle tyres or sports balls.
9 The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product,
but must be supplied by the operator.
9 Failure to heed these warnings may result in fatal personal injury and/or property damage.
2. INTRODUCTION
Suitable for inflating tyres on cars, vans, 4x4s, motorcycles and bicycles with an auto stop feature. Backlit LCD digital display. 2835 SMD
LED worklight with strobe and SOS light. Supplied with 12V plug. The accessory kit includes a 700mm extension tube with Schrader
connection, Presta type adaptor, ball spike and inflatable adaptor.
3. SPECIFICATION
MODEL NO: MAC12D
Input: 12V DC
CFM: 22 L/min
Pressure Range: 0-120psi
Units: Psi, kPa, kg/cm² and bar
Max Current: 10A
Fuse: 10A
Max Runtime: 60 mins
MAC12D Issue 4 18/06/24
Original Language Version
© Jack Sealey Limited
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
4. OPERATION
IMPORTANT: ensure you have read and understand all safety instructions before operating the device.
STEP.1 STEP.2 STEP.3
1. Check the door jamb or vehicle’s manual for
correct tyre pressure.
2. Connect the power cord to the 12V DC
power port on the vehicle. Place the unit on a
dry level surface.
3. The built-in light functions are controlled by
pressing the button with the light bulb symbol:
1st press-Continuous light. 2nd press-Fast
blinking. 3rd press-SOS. 4th press- O feature
STEP.4 STEP.5 STEP.6
4. Connect the air hose to the tyre valve stem.
Ensure the connector is secure.
5. Your current tire pressure will be displayed.
Adjust the ination psi with the “+” or “-”
buttons.
6. Press the power button to start inating. The
mini compressor will commence operation and
auto-stop at the preset pressure.
NOTE: If unit does not come on check the fuse
in the 12V plug. Replace if blown.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REGISTER YOUR
PURCHASE HERE
Original Language Version
© Jack Sealey Limited
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
MAC12D Issue 4 18/06/24
