DS-K3B220LX Series Swing Barrier
User Manual
Legal Informaon
About this Document
●
This Document includes instrucons for using and managing the Product. Pictures, charts,
images and all other
informaon hereinaer are for descripon and explanaon only.
●
The
informaon contained in the Document is subject to change, without noce, due to
rmware updates or other reasons. Please nd the latest version of the Document at the
Hikvision website ( hps://www.hikvision.com ). Unless otherwise agreed, Hangzhou Hikvision
Digital Technology Co., Ltd. or its aliates (hereinaer referred to as "Hikvision") makes no
warranes, express or implied.
●
Please use the Document with the guidance and assistance of professionals trained in
supporng the Product.
About this Product
●
This product can only enjoy the aer-sales service support in the country or region where the
purchase is made.
●
If the product you choose is a video product, please scan the following QR code to obtain the
"Iniaves on the Use of Video Products", and read it carefully.
Acknowledgment of Intellectual Property Rights
●
Hikvision owns the copyrights and/or patents related to the technology embodied in the
Products described in this Document, which may include licenses obtained from third pares.
●
Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part
of this Document may be excerpted, copied, translated, or modied in whole or in part by any
means without
wrien permission.
●
and other Hikvision's trademarks and logos are the properes of Hikvision in
various
jurisdicons.
●
Other trademarks and logos menoned are the properes of their respecve owners.
LEGAL DISCLAIMER
●
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS
IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR
DS-K3B220LX Series Swing Barrier User Manual
i
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
●
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
●
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
●
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Data
Protecon
●
To protect data, the development of Hikvision Products incorporates privacy by design
principles. For example, for Products with facial
recognion features, biometrics data is stored in
your Products with encrypon method; for ngerprint Products, only ngerprint template will be
saved, which is impossible to reconstruct a
ngerprint image.
●
As a data controller/processor, you may process personal data, including collecon, storage, use,
processing, disclosure,
deleon, etc. You are advised to pay aenon to and comply with
applicable laws and regulaons related to the protecon of personal data, including without
limitaon, conducng security controls to safeguard personal data, such as, implemenng
reasonable administrave and physical security controls, conduct periodic reviews and the
assessments of the
eecveness of your security controls.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
DS-K3B220LX Series Swing Barrier User Manual
ii
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the
instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television
recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the
separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC
Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired
operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
DS-K3B220LX Series Swing Barrier User Manual
iii
under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve
2011/65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated
collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the
baery to your supplier or to a designated
collecon point. For more informaon see:www.recyclethis.info
DS-K3B220LX Series Swing Barrier User Manual
iv
Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The
precauon measure is divided into Dangers and Cauons:
Dangers: Neglecng any of the warnings may cause serious injury or death.
Cauons: Neglecng any of the cauons may cause injury or equipment damage.
Dangers: Follow these safeguards to prevent
serious injury or death.
Cauons: Follow these precauons to prevent
potenal injury or material damage.
Danger:
●
All the electronic operaon should be strictly compliance with the electrical safety regulaons,
re prevenon regulaons and other related regulaons in your local region.
●
Please use the power adapter, which is provided by normal company. The power consumpon
cannot be less than the required value.
●
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or
re hazard.
●
Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
If the top caps should be open and the device should be powered on for maintenance, make
sure:
1. Power
o the fan to prevent the operator from geng injured accidentally.
2. Do not touch bare high-voltage components.
3. Make sure the switch’s wiring sequence is correct
aer maintenance.
●
Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
●
When the product is installed on wall or ceiling, the device shall be
rmly xed.
●
If smoke, odors or noise rise from the device, turn
o the power at once and unplug the power
cable, and then please contact the service center.
●
Do not ingest
baery, Chemical Burn Hazard.
This product contains a coin/buon cell baery. If the coin/buon cell baery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used
baeries away from children. If the baery compartment does not close
securely, stop using the product and keep it away from children. If you think baeries might have
been swallowed or placed inside any part of the body, seek immediate medical
aenon.
●
If the product does not work properly, please contact your dealer or the nearest service center.
Never
aempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
DS-K3B220LX Series Swing Barrier User Manual
v
Cauons:
●
Stainless steel may be corroded in some circumstances. You need to clean and care the device by
using the stainless steel cleaner. It is suggested to clean the device every month.
●
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places
subject to shock (ignorance can cause equipment damage).
●
Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
electromagnec radiaon.
●
The device cover for indoor use shall be kept from rain and moisture.
●
Exposing the equipment to direct sun light, low
venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause
re danger).
●
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the
same me.
●
Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the ngers may erode the surface coang of the device
cover.
●
Please use a
so and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
●
Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper.
Transportaon without the
original wrapper may result in damage on the device and lead to addional costs.
●
Improper use or replacement of the
baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by
the
baery manufacturer.
●
Biometric recognion products are not completely applicable to an-spoong environments. If
you require a higher security level, use
mulple authencaon modes.
●
Do not stay in the lane when the device is reboong.
●
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
●
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
●
The
instrucons shall require connecon of the equipment protecve earthing conductor to the
installaon protecve earthing conductor.
DS-K3B220LX Series Swing Barrier User Manual
vi
Available Models
Product Name Model Descripon
Swing Barrier DS-K3B220LX-L Le Pedestal
DS-K3B220LX-M Middle Pedestal
DS-K3B220LX-R Right Pedestal
DS-K3B220LX Series Swing Barrier User Manual
vii
Contents
Chapter 1 Overview .................................................................................................................... 1
1.1 Introducon ........................................................................................................................... 1
1.2 Main Features ........................................................................................................................ 1
Chapter 2 System Wiring ............................................................................................................ 3
Chapter 3 Installaon ................................................................................................................. 6
Chapter 4 General Wiring ......................................................................................................... 10
4.1 Components Introducon .................................................................................................... 10
4.2 Terminal Descripon ............................................................................................................ 12
4.2.1 Main Lane Control Board Terminal
Descripon .......................................................... 13
4.2.2 Sub Lane Control Board Terminal Descripon ............................................................ 14
4.2.3 Alarm Input Wiring ..................................................................................................... 14
4.2.4 Exit
Buon Wiring ....................................................................................................... 15
4.3 Device Sengs via Buon ................................................................................................... 16
4.3.1 Conguraon via Buon ............................................................................................. 17
4.3.2 Set Study Mode via
Buon ......................................................................................... 20
Appendix A. Event and Alarm Type ........................................................................................... 21
Appendix B. Table of Audio Index Related Content ................................................................... 22
Appendix C. Error Code
Descripon .......................................................................................... 23
Appendix D. Buon Conguraon Descripon .......................................................................... 24
Appendix E. Communicaon Matrix and Device Command ....................................................... 28
DS-K3B220LX Series Swing Barrier User Manual
viii
Chapter 1 Overview
1.1 Introducon
The Swing barrier with 4 IR lights is designed to detect unauthorized entrance or exit. By adopng
the ap barrier integratedly with the access control system, person should authencate to pass
through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in
aracons,
stadiums, construcon sites, residences, etc.
1.2 Main Features
●
Control mode, free passing mode and prohibion mode selectable on both entering and exing
direcon.
●
The barrier will be locked or stop working when people are nipped
●
An-forced-accessing
The barrier will be locked automacally without open-barrier signal.
●
Self-detecon, Self-diagnoscs, and automac alarm
●
Audible and visual alarm will be triggered when
detecng intrusion, tailgang, reverse passing,
and climbing over barrier
●
LED indicates the entrance/exit and passing status
●
Barrier is in free status when powered down; If the device is installed with lithium
baery
(oponal),
the barrier remains open when powered down
DS-K3B220LX Series Swing Barrier User Manual
1
●
Fire alarm passing
When the re alarm is triggered, the barrier will be open automacally for emergency
evacuaon
●
Valid passing
duraon sengs
System will cancel the passing permission if a person does not pass through the lane within the
valid passing
duraon
●
Adjustable indicator brightness
●
Bidireconal (Entering/Exing) lane
The barrier opening and closing speed can be
congured according to the visitor ow
●
TCP/IP network
communicaon
The communicaon data is specially encrypted to relieve the concern of privacy leak
●
Permissions
validaon and an-tailgang
DS-K3B220LX Series Swing Barrier User Manual
2
Chapter 2 System Wiring
The preparaon before installaon and general wiring.
Steps
Note
●
The device should be installed on the concrete surface or other non-ammable surfaces.
●
If the installaon area is too close to the wall, make sure the distance between the pedestal and
the wall should be no less than 20 mm, or you cannot open the pedestal's top panel.
●
The dimension is as follows.
DS-K3B220LX Series Swing Barrier User Manual
3
Figure 2-1 Dimension
1.
Draw a central line on the installaon surface of the le or right pedestal.
2.
Draw other parallel lines for installing the other pedestals.
Note
The distance between the nearest two line is L + 146 mm. L represents the lane width.
3.
Slot on the installaon surface and dig installaon holes. Put 4 expansion bolts of M12*120 for
each pedestal.
DS-K3B220LX Series Swing Barrier User Manual
4
Figure 2-2 Hole Posion and System Wiring
4.
Bury cables. Each lane buries 1 high voltage cable and 1 low voltage cable. For details, see the
system wiring diagram of step 3.
Note
●
High voltage: AC power input
Low voltage: interconnecng cable (communicaon cable and 24 V power cable) and network
communicaon cable
●
The supplied
interconnecng cable length is 4 m.
●
The suggested inner diameter of the low voltage conduit is larger than 30 mm.
●
If you want to bury both of the AC power cord and the low voltage cable, the two cables
should be in separated conduits to avoid interference.
●
If more peripherals are required to connect, you should increase the conduit diameter or bury
another conduit for the external cables.
●
The external AC power cord should be double-insulated.
●
The network cable must be CAT5e or the network cable has
beer performance. And the
suggested network cable length should be less than 100 m.
DS-K3B220LX Series Swing Barrier User Manual
5
Chapter 3 Installaon
1. Before installaon, you should unscrew and disassemble the pedestal.
Figure 3-1 Screw Hole
2. Keep the disassembled components and make sure the accessories are intact.
3. Prepare for system wiring and installaon. For details, see System Wiring .
DS-K3B220LX Series Swing Barrier User Manual
6
4. Place the pedestal above the embedded expansion bolt. Unscrew and remove the maintenance
door.
Figure 3-2 Maintenance Door
5. Place the platen on the expansion bolt and adjust the posion of the pedestal to make sure the
platen ts well to the boom of the pedestal.
DS-K3B220LX Series Swing Barrier User Manual
7
Figure 3-3 Platen
6. Fasten the nuts of the expansion bolts with a screwdriver (sha diameter under 7 mm and
shank length more than 120 mm) and reinstall the maintenance door.
Scan the QR Code to watch the
installaon guide video.
DS-K3B220LX Series Swing Barrier User Manual
8
DS-K3B220LX Series Swing Barrier User Manual
9
Chapter 4 General Wiring
Note
●
When you should maintain or disassemble the high voltage modules, you should remove the
enre high voltage modules and maintain it outside the turnsle. You should unplug the cables
that connected to the peripherals before maintenance to avoid destroy of the device.
●
When disassembling the high voltage module, you should disconnect the power to avoid injury.
●
If only wiring is needed without maintenance, do not remove the high voltage modules.
●
The switch and the main lane control board are already connected. The 14 AWG cable to
connect between the AC electric supply and the switch should be purchased separately.
●
2
interconnecng cables are supplied: 24 V Power Cable and Communicaon Cable.
24 V Power Cable: 5 m long, which is in the middle and right pedestal.
Communicaon Cable: 4 m long, CAT5e, which is in the package of middle and right pedestal.
4.1 Components Introducon
By default, basic components of the turnsle are connected well. The pedestals can communicate
by wiring the interconnecng cables. And the turnsle supports wiring the AC electric supply for
the whole system's power supply.
Note
The voltage uctuaon of the electric supply is between 100 VAC and 240 VAC, 50 to 60 Hz.
The picture displayed below describes each component's posion on the turnsle.
Note
The diagram is for reference only.
DS-K3B220LX Series Swing Barrier User Manual
10
Figure 4-1 Components Diagram
The picture displayed below describes the IR sending/receiving module and their corresponding
number on the pedestal.
DS-K3B220LX Series Swing Barrier User Manual
11
Figure 4-2 IR Sending/Receiving Module Posion
Note
If the turnsle contains two lanes, standing at the entrance posion, the IR modules on the le
pedestal are the IR sending modules. The IR modules on the right pedestal are the IR receiving
modules. The IR modules on the le side of the middle pedestal are the IR receiving modules,
while the IR modules on the right side of the middle pedestal are the IR sending modules.
4.2 Terminal Descripon
The lane controller contains main lane controller and sub lane controller, which controls the IR
beams, motor, and other components' work.
DS-K3B220LX Series Swing Barrier User Manual
12
4.2.1 Main Lane Control Board Terminal Descripon
The main lane control board contains interconnecng interface, USB ash drive interface
(reserved), access control board interface,
re input interface, exit buon interface, 12 VDC output
interface (reserved), 24 VDC input interface, fan interface, adaptor interface, encoder interface,
power supply interface for motor, supercapacitor interface, IR adaptor interface and light bar
interface.
The picture displayed below is the main lane control board diagram.
Figure 4-3 Main Lane Control Board Terminals
DS-K3B220LX Series Swing Barrier User Manual
13
4.2.2 Sub Lane Control Board Terminal Descripon
The sub lane control board contains interconnecng interface, USB ash drive interface (reserved),
access control board interface, exit
buon interface, 12 VDC power output interface (reserved), 24
VDC power input interface, fan interface, adaptor interface, encoder interface, power supply
interface for motor, supercapacitor interface, IR adaptor interface and light bar interface.
The picture displayed below is the sub lane control board diagram.
Figure 4-4 Sub Lane Control Board Terminals
4.2.3 Alarm Input Wiring
On the main lane control board, you can wire the re alarm input interface.
DS-K3B220LX Series Swing Barrier User Manual
14
Figure 4-5 Remaining Open
Figure 4-6 Remaining Closed
4.2.4 Exit Buon Wiring
The main and sub lane control board each has 1 buon interface, which can be connected to exit
buon or face recognion device.
Figure 4-7 Exit Buon Wiring (Entrance)
Figure 4-8 Exit Buon Wiring (Exit)
DS-K3B220LX Series Swing Barrier User Manual
15
Note
●
The face recognion devices are powered via 12 VDC power output interface of the main and
sub lane control board.
●
Barrier open at the entrance: connect to BTN1 and GND.
●
Barrier open at the exit: connect to BTN2 and GND.
4.3 Device Sengs via Buon
You can congure the device via buon on the main lane control board.
Funcon Main Lane Control Board Only
Working Mode
Normal/Study Mode Congure via buon (refer to Set Study Mode
via Buon )
keyfob Pairing Not support
Passing Mode Congure via buon
Memory Mode Congure via buon
Parameter Sengs
Barrier Opening Speed Congure via buon
Barrier Closing Speed Congure via buon
Card Reading on the Alarm Area Congure via buon
Enter Duraon Congure via buon
Exit Duraon Congure via buon
IR Sensing Duraon Congure via buon
Intrusion Duraon Congure via buon
Overstay Duraon Congure via buon
Delay Time for Barrier Closing Congure via buon
Authencaon on Free Passing Congure via buon
Volume Adjustment Congure via buon
Barrier Material Congure via buon
Barrier Length Congure via buon
Light Brightness Congure via buon
DS-K3B220LX Series Swing Barrier User Manual
16
Funcon Main Lane Control Board Only
Restore to Default Congure via buon
Voice Prompt
Climbing over Barrier Not support
Reverse Passing Not support
Exceeding Passing Duraon Not support
Intrusion Alarm Not support
Tailgang Alarm Not support
Overstaying Alarm Not support
Motor Inspecon Congure via buon
Self-check Voice Prompt Not support
Study Mode Voice Prompt Not support
Refer to Buon Conguraon Descripon for detailed informaon.
4.3.1
Conguraon via Buon
Buon Descripon
Figure 4-9 Buon
DS-K3B220LX Series Swing Barrier User Manual
17
Exit Buon
●
Press to open the barrier from the entrance posion.
●
Double press to open the barrier from the exit posion.
Parameter Conguraon Buon
●
LEFT: Press to add 10 to conguraon data.
●
RIGHT: Press to add 1
conguraon data.
●
CANCEL: Return to the Level-1 menu, or exit Level-1 menu.
●
OK:
Conrm the sengs, or enter conguraon mode, or enter the Level-2 menu.
Note
●
Conguraon No. is displayed by two digital tubes.
●
Level-1 Menu: If the decimal point on the right is on, it indicates the Level-1 menu. The
number represents the conguraon No.
●
Level-2 Menu: If the decimal point in the middle is on, it indicates the level-2 menu. The
number represents the conguraon No.
DS-K3B220LX Series Swing Barrier User Manual
18
Buon Conguraon Procedure
Figure 4-10 Procedure
Steps:
1. Hold OK buon for 3 s unl one beep occurs. The device enter the conguraon mode. Level 1
menu lights up. The display screen displays the
conguraon No. 1.
2. In the Level-1 menu, press LEFT (plus 10) and RIGHT (plus 1) to set the conguraon No. Press
OK to save
sengs and the enter the level-2 menu. Press CANCEL to exit the current menu, or
conduct no operaon for 5 s to cancel conguraon and exit the current menu.
3. Aer enter the level 2 menu, press LEFT (plus 10) and RIGHT (plus 1) to set the parameters at
your needs. Press OK to save the
sengs or press CANCEL to exit the current menu, or conduct
no operaon for 5 s to cancel conguraon and exit the current menu.
DS-K3B220LX Series Swing Barrier User Manual
19
Note
-
The conguraon No. will display in a cycle.
-
Each conguraon No. refers to a funcon. For details about the conguraon No. and its
related funcon, see Buon Conguraon Descripon .
Example
If you want to pair keyfobs via the
buon. Hold OK for 3 s unl you hear one beep. The device
enters the conguraon mode and the level 1 decimal point lights up. The display screen will
display the No. 1.
In the Level-1 menu, press Right (plus 1) to adjust the
conguraon No. to 2. Press OK to save the
sengs and enter the Level-2 menu.
Press Right (plus 1) to adjust the
conguraon No. to 2. Press OK to save the sengs.
4.3.2 Set Study Mode via
Buon
Enter the study mode through buon conguraon to set the closed posion of the device barrier.
Steps
Note
●
For details about buon's operaon, see Conguraon via Buon .
●
For details about the conguraon No. and its related funcon, see Buon Conguraon
Descripon .
1.
Enter the study mode.
1) Enter the conguraon mode.
2) Set the
conguraon No. in Level-1 to 1. The device will enter the study mode.
3) Set the conguraon No. in the Level-2 menu to 2. The device will enter the study mode.
2.
Power
o the device and swing the barrier unl it is vercal to the pedestal.
3.
Power on the device.
The device will remember the current
posion automacally.
4.
Reboot the device when you hear Study accomplished. Please reboot.
DS-K3B220LX Series Swing Barrier User Manual
20
Appendix A. Event and Alarm Type
Event Alarm Type
Tailgang Visual and Audible
Reverse Passing Visual and Audible
Force Accessing None
Climb over Barrier Visual and Audible
Overstay Visual and Audible
Passing Timeout None
Intrusion Visual and Audible
Free Passing
Authencaon Failed
Visual and Audible
Barrier Obstructed None
DS-K3B220LX Series Swing Barrier User Manual
21
Appendix B. Table of Audio Index Related Content
Index Content
1 Climbing over the barrier.
2 Reverse passing.
3 Passing meout.
4 Intrusion.
5 Tailgang.
6 Overstay.
DS-K3B220LX Series Swing Barrier User Manual
22
Appendix C. Error Code Descripon
The swing barrier will display the error code on the seven-segment display if error occurred. Refer
to the table below to
nd the descripon of each number.
Error Reason Code Error Reason Code
The First IR Beam Triggered 01 Not Studying 54
The Second IR Beam Triggered 02 Obstrucon 55
The Third IR Beam Triggered 03 Exceeding Studying Range 56
The Fourth IR Beam Triggered 04 Encoder Excepon 57
Loudspeaker Oine (If the kit
is not installed, the error code
of "49" will appear but the
device
funcons normally)
49 Motor Excepon 58
Interconnecng Excepon 53
DS-K3B220LX Series Swing Barrier User Manual
23
Appendix D. Buon Conguraon Descripon
Refer to the table below for device conguraon via buon on the main lane control board.
No. Descripon Default Value Parameters Notes
1 Normal/Study
Mode
1 1-Normal Mode
2-Study Mode
2 keyfob Pairing 1 1-Normal Mode
2-Pairing Mode
3 Passing Mode 1 1-Both sides
under control
2-Entrance under
control; exit
prohibited
3-Entrance under
control; exit on
inducve mode
4-Both sides on
inducve mode
5-Entrance on
inducve mode;
exit under control
6-Entrance on
inducve mode;
exit prohibited
7-Both sides
prohibited
8-Entrance
prohibited; exit
under control
9-Entrance
prohibited; exit on
inducve mode
4 Memory Mode 2 1-Disable
2-Enable
5 keyfob Remote
Control
2 1-one to one
DS-K3B220LX Series Swing Barrier User Manual
24
No. Descripon Default Value Parameters Notes
1-one to mulple
6 Barrier Opening
Speed
5 1-1, 2-2, …10-10
7 Barrier Closing
Speed
5 1-1, 2-2, …10-10
8 Card Reading on
the Alarm Area
2 1-Do not open
2-Open
9 Enter Duraon 5 5-5s，6-6s，7-
7s, ..., 60-60s
10 Exit Duraon 5 5-5s，6-6s，7-
7s, ..., 60-60s
11 IR Sensing
Duraon
0 0-0s，1-1s，2-2s,...,
25-25s
12 Intrusion Duraon 0 0-0s，1-1s，2-2s,...,
20-20s
13 Overstay Duraon 0 0-0s，1-1s，2-2s,...,
20-20s
14 Delay Time for
Barrier Closing
0 0-0s，1-1s，2-2s，
3-3s，4-4s，5-5s
15 Control Mode 1 1-Buon
Conguraon
2-DIP Switch on
Access Control
Board
Unable to change
16 Authencaon on
Free Passing
1 1-Disable
2-Enable
17 IR Conguraon
for Closing in
Advance
1 1-1，2-2, …, N-N Unable to change
18 Swing Barrier
Quanty
1 1-Dual Lanes
2-Single Lane
Unable to change
19 Motor Rotaon 1 1-Clockwise
2-Anclockwise
Unable to change
DS-K3B220LX Series Swing Barrier User Manual
25
No. Descripon Default Value Parameters Notes
20 Motor Type 1 1-Dunker Motor
2-Control Motor
Unable to change
21 Volume 2 1-0，2-1，3-2，4-
3，5-4
The device will be
muted when set
to "1".
22 Authencated
Passing
1 1-Disable
2-Enable
Unable to change
23 Invalid Card No. 1 1-Disable
2-Enable
Unable to change
24 Fingerprint
Unmatched
1 1-Disable
2-Enable
Unable to change
25 Climbing over
Barrier
1 1-Disable
2-Enable
26 Reverse Passing 1 1-Disable
2-Enable
27 Exceeding Passing
Duraon
1 1-Disable
2-Enable
28 Intrusion Alarm 1 1-Disable
2-Enable
29 Forced Passing 1 1-Disable
2-Enable
Unable to change
30 Tailgang Alarm 1 1-Disable
2-Enable
31 Unauthorized
Passing
1 1-Disable
2-Enable
Unable to change
32 Exceeding
Authencaon
Duraon
1 1-Disable
2-Enable
Unable to change
33 Failed
Authencaon
1 1-Disable
2-Enable
Unable to change
34 Expired Cercate 1 1-Disable Unable to change
DS-K3B220LX Series Swing Barrier User Manual
26
No. Descripon Default Value Parameters Notes
2-Enable
35 Overstaying Alarm 1 1-Disable
2-Enable
36 Barrier Material 1 Acrylic
37 Barrier Length 8 1-550
2-600
3-650
4-700
5-750
6-800
7-850
8-900
38 Motor Inspecon 1 1-Disable
2-Enable on Main
Lane
3-Enable on Sub
Lane
39 Brightness of
Light
3 0-0，1-1，2-2, … ,
10-10
The higher the
value is, the
brighter the light
will be.
40 Self-check Voice
Prompt
2 1-Disable
2-Enable
Voice prompt of
self-check at
startup and motor
inspecon
41 Study Mode Voice
Prompt
2 1-Disable
2-Enable
Voice prompt of
study mode
99 Restore to Default 1 1- Default
2- Start
The device will
reboot.
DS-K3B220LX Series Swing Barrier User Manual
27
Appendix E. Communicaon Matrix and Device
Command
Communicaon Matrix
Scan the following QR code to get the device communicaon matrix.
Note that the matrix contains all
communicaon ports of Hikvision access control and video
intercom devices.
Figure E-1 QR Code of Communicaon Matrix
Device Command
Scan the following QR code to get the device common serial port commands.
Note that the command list contains all commonly used serial ports commands for all Hikvision
access control and video intercom devices.
Figure E-2 Device Command
DS-K3B220LX Series Swing Barrier User Manual
28
UD28184B-B
