Loading ...
Loading ...
Loading ...
– 5 –
3-2. Connecting the Cable to the Printer
Notethattheinterfacecableisnotprovided.Pleaseuseacablethatmeetsspecications.
CAUTION
Before connecting/disconnecting the interface cable, make sure that power to the printer and
all the devices connected to the printer is turned off. Also make sure the power cable plug is
disconnected from the AC outlet.
3-2-1. Parallel Interface Cable
(1) Make sure the printer is turn off.
(2) Affix the ferrite core onto the cable as shown in the
illustration.
(3) Pass the fastener through the ferrite core.
(4) Loop the fastener around the cable and lock it. Use scissors to
cut off any excess.
(5) Connect the interface cable to the connector on the rear panel
of the printer.
(6) Fasten the connector clasps.
Ferrite core
Interface cable
10 cm
(maximum)
Fastener
Loading ...
Loading ...
Loading ...