Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/78418554-sp742me/bg10.png)
– 12 –
PAIR
RST
PAIR
RST
PAIR button
PAIRRST
PAIR buttonRST button
LED
3-8. Bluetooth Settings
(For
Bluetooth Interface Models only
)
(2) After turning the printer's power switch on, press and hold the PAIR button on the rear interface of the printer for
5secondsormore,andthenreleaseit.TheLEDwillashgreen.
Pair the printer with the master device by following the procedure below.
Compatibility list: http://www.star-m.jp/prjump/000031.html
3-8-1. Pairing using SSP (Simple Secure Pairing) [Default]
(1) Working on the master device, tap [Settings] and set [Bluetooth] to ON.
<
LED
>
Indicates the status of the Bluetooth interface.
Green (on): Not connected.
Green(ashing):Readytostartpairing.
Blue (on): Connected.
Purple(ashing):AutoconnectionON.
<
iOS > < Android >
(3) Pairingwillbepossiblefor60secondsfromwhentheLEDbeginsashinggreen.Duringthistime,execute"Search
for devices" from the master device and tap the relevant device from the displayed list.
Device name: Star Micronics (default)
(4) InaniOSdevice,afterpairing,theLEDwillautomaticallybeginashingblue,andtheprinterwillbeautomatically
connected. In an Android device, the LED turns blue only while data is sent.
(5) Connect to the printer from the master device application and perform printing. If the printing is successful, the
pairing process has been completed.
Note: The printer performs various processes immediately after connecting to or disconnecting from a master
device.
Please wait approximately 0.1 seconds after connecting, and approximately 0.5 seconds after
disconnecting, before beginning communications with the printer. This wait will ensure that the next
action you perform is executed correctly.
Loading ...
Loading ...
Loading ...