Star Micronics SP742ME User Guide

Loading ...

– 14 –

< Current Setting >

Auto Connection : OFF

To enable this setting, turn

Printer Power OFF and turn ON.

PAIR

RST

PAIR

RST

RST button

3-8-4. Setting up Auto Connection

◆

Setting up from the Main Unit for the SP742

Note: e following procedure explains how to change the Auto Connection function setting from ON to OFF.

If you want to change it from OFF to ON, please follow the same procedure.

(1) When paper is loaded in the printer and it is turned on, the [POWER] LED(green) on the front of the

printer turns on.

(2) Ifyouholddownthe[RST]buttononthebackoftheprinterforatmorethanveseconds,initialoperationsare

performedinthesamewayaswhenthepoweristurnedon,andtheLEDsonthefrontoftheprinterash.Ifyou

pressthe[RST]buttonwhentheprinterisplacedupright,placeithorizontallyagainwhiletheLEDisashing.

(3) The following information is printed. After that, turn the printer off and then back on again to set "Auto

Connection" to OFF.

(4) To make sure "Auto Connection" is set to OFF correctly, perform self-printing as described in "5-4-1. Self

Printing Mode"

Setting from the Soware

After pairing your device and the SP700, change "Auto Connection" in the following application provided by our

company.



iOS: Download "Star Setting Utility" from the following Web site.

http://www.star-m.jp/prjump/000003.html



Android: Download "Star Setting Utility" from the following Web site.

http://www.star-m.jp/prjump/000004.html



Windows: Download "Star Bluetooth Utility" from the following Web site.

http://www.star-m.jp/prjump/000006.html

Loading ...

Star Micronics SP742ME Ethernet LAN Impact Receipt Printer