Loading ...
Loading ...
Loading ...
• The Registrar is usually the wireless LAN access point/router.
• The settings page may differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 10 or Windows 11 computer as a Registrar, complete the following steps:
6. Do one of the following:
• Windows 11
Click
> All apps > Windows Tools > Control Panel. In the Hardware and Sound group, click Add
a device.
• Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
• To use a Windows 10 or Windows 11 computer as a Registrar, you must register it to your network in
advance. For more information, see the instructions supplied with your wireless LAN access point/
router.
• If you use Windows 10 or Windows 11 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. To install the driver and software necessary to use
your machine, go to your model's Downloads page at support.brother.com/downloads.
7. Select your machine and click Next.
8. Type the PIN displayed on the machine's LCD, and then click Next.
9. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected]. Press [OK].
You have completed the wireless network setup. To install the drivers or the application necessary for operating
your machine, go to your model's Downloads page at
support.brother.com/downloads.
Related Information
• Use the Wireless Network
Related Topics:
• Wireless LAN Report Error Codes
97
Loading ...
Loading ...
Loading ...