Loading ...
Loading ...
Loading ...
18 - USE 91477A079/C
Now the display of the appliance shows
the Settings menu
to activate the
Remote control (on some models only: within
the Connection menu).
SmegConnect Menu
This menu allows you to display some
technical information about the connection:
• Cloud: Cloud connection status (Not
connected/Connected).
• Wi-Fi: Access Point connection status (not
connected or the strength of the signal
when connected).
• Access Point SSID: name of the Wi-Fi
network.
• IPv4 network address: IPv4 address of the
Connectivity card.
• IPv6 network address: IPv6 address of the
Connectivity card.
• MAC address: MAC address of the
Connectivity card.
• Wi-Fi FW release: FirmWare version of the
Connectivity card.
• SW Compliance ID: identification of
compliance with the essential requirements
of the RED directive.
Information on the connection
Within the App, in the Settings menu of the
product pages you will find information
about the connection, such as:
• device registration date;
• name of the network;
• level of Wi-Fi signal;
• MAC address of the Connectivity board;
• Firmware version of the Connectivity board;
• IPv4 and IPv6 network addresses;
• SW Compliance ID (identification of
compliance with the essential requirements
of the RED directive).
Deletion of the registration
To delete the registration of the device from
the App:
•Go to the Settings menu on the App and
follow the instructions.
To delete the registration of the device on the
product (on some models only):
1. Touch the Settings button on the main
menu display on the appliance.
2. (on some models only) Select Connection
.
3. Select SmegConnect.
4. Touch the Registration button.
5. Touch the Basket button.
6. Touch the Confirm button to confirm
that you wish to cancel the registration.
To delete the registration of the user:
• Enter the App, My account menu and touch
the Delete user button.
Make sure that you activate the
Remote Control in order to control the
device via the App.
This information may be useful when
requesting assistance.
The product can be registered again
following the procedure described
above.
This procedure only deletes the
registration and restores the factory
settings for the SmegConnect menu.
The deletion made on the appliance
does not require any connection to the
cloud.
This type of deletion only affects the
product, please delete the device also
from the App.
The product can be registered again
following the procedure described
above.
Loading ...
Loading ...