Loading ...
Loading ...
14 - USE 91477A079/C
versions of the operating systems are
available at the following link:
www.smeg.com/smegconnect/
• Wi-Fi network (2.4 GHz band, WPA2
protected) active and available in the place
where the appliance is installed.
• Internet connection.
• Name and password of the home Wi-Fi.
Installation of the App
Download the App SmegConnect on your
mobile smartphone or tablet from App Store
(Apple devices) or Google Play Store (Android
devices) and install it.
Creation of the account
1. Launch the SmegConnect App.
2. Enter the information required in order to
register.
3. A confirmation e-mail is sent to the address
that has been entered when the registration
procedure has been completed.
Product registration
The registration step alternates operations to be
made in the App and on the display of the
appliance . Make sure you are close to the
appliance.
Connection to the device
1. Tap Log in.
2. In the following screen (Home page), tap
Add product.
3. Select the type of product you wish to
connect (in this case "oven").
4. Touch the Settings button (at the
bottom right) on the main menu display on
the device.
• (on some models only) Select Connection
.
5. Select SmegConnect.
6. Touch the Registration button.
7. Select the registration procedure for the
required product (Manual or Automatic).
Manual mode
1. Select Manual mode.
2. Go to the Wi-Fi settings on the mobile
device and select the "smegconnect"
network.
3. Enter the password "smeg0001" and wait
for the connection to be established.
4. Go back to the SmegConnect App and tap
Next.
5. Press the Confirm button within one
minute.
6. Enter the Access Point data:
• Name of the home Wi-Fi network.
The fields marked with an asterisk “*”
are mandatory.
If "REGISTRATION FAILED!" displays
during the registration process, it means
that some steps of the procedure were
not carried out correctly or it was
stopped.
The registration procedure can be
interrupted by pressing the RETURN
button (available on some screens
only).
There is no need to activate the
"Connectivity" setting on the appliance
beforehand. The procedure starts
automatically.
Loading ...
Loading ...
Loading ...