Loading ...
Loading ...
Loading ...
AXIS M1033-W Network Camera
Events
Events
The Axis product can be configured to p e rform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio Detection, on page 32
.
- Motion Detection — trigger the rule when motion is detected, see
Motion Detection, on page 30
.
- PIR — trigger the rule when the PIR sensor detects motion, see
PIR Sensor, on page 32
.
- Tampering — tr igge r t he rule when tampering is detected, see
Camera Tampering, on page 30
.
• Hardware
- Network — trigger the rule if n etwork conne ction is lost or restored.
• Input Signal
- Digital Input Port — trigger the rule when a n I/O port receives a signal fro m a connected device, see
I/O
Ports, on page 50
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 11
. This can for example be used to validate a ctions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ op
eration. This can for example b e used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a P TZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from
the preset position.
• Storage
- Available — trigger the r
ule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigge r the rule wh e n the storage device is full. U nder normal operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked —triggertheruleifthestoragedeviceislocked(writeprotected).
• System
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 35
. This can for example be used to
upload an image every 5 minutes.
- Use Schedule — t r igge r the rule according to the selected schedule, see
Schedules, on page 35
.
Available actions include:
• Activate Light — turn the built-in light on or off.
33
Loading ...
Loading ...
Loading ...