Loading ...
Loading ...
Loading ...
AXIS M1033-W Network Camera
Accessing the Product
Note
• The default a dministrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product mu st be reset to the factory default settings. See
Reset to F a cto ry Default
Settings, on page 52
.
Set P ower Line Frequency
Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config(see
page 52
)
or by resetting the product to factory default.
Select the power line freq uency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flickeriftheproductisusedinfluorescent light environments.
When using 50 H z, the max imum frame rate is limited to 25 fps.
Note
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually us ed; m ost other parts of
the world use 50 Hz. Local variations may apply, always check with the local authorities.
The Live V iew Page
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, so
me of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
The Stream Profile drop-
down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles.See
Stream Profiles, on page 20
.
Click Pulse to activate the built-in light for a defined period of time, for example 20 seconds.
11
Loading ...
Loading ...
Loading ...