Loading ...
Loading ...
Loading ...
AXIS M1033-W Network Camera
Accessing the Product
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a s napshot of the video image. The location where the image is saved can be specified
in the AM C Control Panel.
Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escap e) on the computer
keyboard to cancel full screen view.
The Record button is used to record t he curr ent video stream. The location where the recording is saved can be speci fied
in the AM C Control Panel.
AMC Audio Controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when
audio is enabled.
Speaker button — Click to turn the speakers on or off.
Microphone button – Click to mute or unmute the microphone. In
Simplex - speaker only mode
,theMicrophone and Talk
buttons must both be a ctive to send audio to the Axis product. Click either button to stop audio transmission.
Use the slider to control the volume of the speakers and the microphone.
Half-duplex mode
The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured
from the A udio tab in the AMC Con trol panel:
• Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.
• Toggle mode: Click once to switch be t we e n talking and listening.
Simplex – speaker only mode
To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio
transmission.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under
System Options > Security > Users.
Note
These controls are available if digital PTZ is enabled in the selecte d view area, se e
View Area, on page 21
.
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Center mode button and click in the image to center the camera view on that position. The center mode
button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding
theareatobemagnifi ed. To zoom out, rotate the mouse wheel.
Click the Ctrl panel button to open the PTZ control panel w hich provides ad ditional PTZ controls.
User-defined buttons can also appear in the Control panel. See
Controls, on page 29
.
Select a PTZ preset position to steer the camera view to the saved positio n. See
Preset Positions,
on page 28
.
13
Loading ...
Loading ...
Loading ...