Loading ...
Loading ...
Loading ...
1. Plug your camera into AC power
2. Plug your camera directly into
your router with wired Ethernet wire
(included)
NOTE: Wired Ethernet is required for
setup. Wireless will be congured later.
NOTE: Wait 2-3 minutes for camera
to boot. You will see the camera run
through a full range of pan and tilt
motion.
3. When boot up completes, your
camera's ethernet port will ash yellow
and green lights indicating the camera is
connected to your router.
NOTE: If lights are not ickering the
camera is not receiving data. Please
check for faulty ethernet cable and that
your router is working with another
device.
4. Check that you have WIFI enabled in
your phone's system settings
WIRED SETUP
Loading ...
Loading ...
Loading ...