Loading ...
Loading ...
Loading ...
Connecting to External Devices
Remote & Accessories
Connect remote controls or other accessories, such as keyboard, mouse and gamepad, to interact with your
Smart Laser Console easily.
Connect Remote Control
Pair the Bluetooth remote control with the Laser Console.
1. To pair the Bluetooth remote control to the Laser Console after you power the Laser Console on for the first
time, there will be instructions on how to pair the remote control.
2.
If your remote control fails to pair with Laser Console, keep the remote control within 10 feet (304.8 cm)
from the Laser Console, hold and at the same time at least 3 seconds to start pairing until you see
the light pulsing on the remote control.
Note:
•
If your remote control fails to pair with Laser Console, check the Bluetooth is set On by pressing
button to select Settings > Remotes & Accessories > Bluetooth to On.
• This function may not be applicable in some models/countries/regions.
• If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
• If an error occurred with the remote control while using sufficiently charged batteries, you can take out the
batteries for 1~2 seconds then insert them back again. Now the remote control will work normally.
• The remote control cannot be paired to the Laser Console while the Laser Console is in standby mode.
Use HDMI&CEC
Use the Laser Console's remote to control external devices that are connected to the Laser Console by an
HDMI cable. The external devices need to support HDMI&CEC function.
Connecting an external device through HDMI&CEC function
Press button to select Settings > Channels & Inputs > Inputs > HDMI control.
1. Set HDMI control to On.
2. Connect an HDMI&CEC compliant device to the Laser Console.
3. Turn on the connected external device. The device is automatically connected to the Laser Console. After
connection is finished, you can access the menu of the connected device on your Laser Console's screen
using your remote control and control the device.
Enabling device auto power off
Press button to select Settings > Channels & Inputs > Inputs > Device auto power off.
Set to On to turn off CEC compatible external devices when the Laser Console is turned off.
Enabling Laser Console auto power on
Press button to select Settings > Channels & Inputs > Inputs > TV auto power on.
Set to On to turn on the Laser Console when CEC compatible external devices is turned on.
17
Loading ...
Loading ...
Loading ...