Loading ...
Loading ...
Loading ...
AFTER EACH BREW
1 After the unit has cooled, remove the filter
holder from the brew basket. If using
a paper filter, discard it. If using the
permanent filter, wash it thoroughly
with soap and warm water or place on top
rack of dishwasher.
2 Wash the carafe and brew-through lid with
soap and warm water. Use a bottle brush or
a cloth to wash the inside of the carafe. DO
NOT use a wire brush.
3 After the coee maker has cooled, wipe
down the main unit, showerhead, and water
reservoir shelf with a cloth and warm water.
DO NOT immerse the coee maker in water.
CLEANING THE WATER RESERVOIR
Empty the reservoir and hand-wash. We
recommend doing this weekly.
CLEANING THE CARAFE
We recommend cleaning your carafe with
warm, soapy water.
If you want to clean the carafe more
thoroughly, we recommend using a soft foam
brush or placing it in the dishwasher (glass
carafe only). DO NOT use a wire brush.
14
ninjakitchen.com
13
ninjakitchen.com
DELAY BREW, CARE & MAINTENANCE CLEANING & DESCALING
4 The clock will display and count down the
remaining clean cycle time, which takes
approximately 60–75 minutes to complete.
Your unit will deliver a small amount of
cleaning solution to distribute it through the
system. It will then pause, deliver additional
cleaning solution, and continue for full
duration of time. The extended pauses allow
for maximum cleaning and descaling.
5 Upon completion, the coee maker will beep,
the clock will display End, and the CLEAN
light will turn o.
6 Empty the contents of the carafe and place it
back under the brew basket. Clean the water
reservoir with warm, soapy water to remove
any cleaning solution that could aect the
flavor of your coee.
7 Fill the reservoir with fresh water up
to, but not exceeding, the Full line.
8 Flush the system by running a Full Carafe,
Classic brew cycle with water only. After
the cycle is complete, discard the water and
thoroughly clean the carafe.
NOTE: The unit must remain on for the Delay
Brew function to work. DO NOT power o or
unplug after setting Delay Brew.
IMPORTANT: Make sure the Drip Stop is in
the open position.
NOTE: If you attempt to change your
selections while Delay Brew is set, the unit
will beep and DEL AY BREW will flash. To
change your selections, cancel Delay Brew
and repeat the process again.
NOTE: Hard water will cause scale buildup
faster than soft water and the brewer will
indicate it needs cleaning more often.
The CLEAN button will illuminate when a
cleaning cycle is recommended for your unit,
as calcium scale buildup could be aecting the
flavor of your coee.
To clean and descale your Ninja®
Hot & Iced
Coee Maker:
1 Select the Full Carafe size and set the empty
carafe beneath the brew basket.
2 Use a descaling solution specifically
formulated for coee maker cleaning
and follow the directions on the package. Fill
the water reservoir up to, but not exceeding,
the Full line (50 oz. / 60 oz.).
OR
Fill the water reservoir to the Travel Mug line
(16 oz.) with white vinegar, then fill the rest
of the reservoir with water up to, but not
exceeding, the Full line.
3 Once the water reservoir is filled, press the
CLEAN button.
NOTE: To cancel the clean cycle, press
the Power button or CLEAN button once.
The unit will beep and stop brewing through
the cleaning mixture. Steps 6 through 8
are still required to clean out any cleaning
mixture that was circulated through the
system before the cycle was cancelled.
NOTE: The clean cycle takes approximately
60–75 minutes. If you cancel the clean cycle,
your machine will not be properly descaled.
IMPORTANT: Use only white vinegar.
1 Plug the unit in and turn it on by pressing the
power button.
2 After filling the water reservoir and adding
ground coee to the filter holder, be sure
the reservoir and brew basket are securely
in place. Place an appropriately sized vessel
under brew basket.
3 Press DELAY BREW. DELAY BREW will
illuminate and the clock will begin to flash
“12:00” or the last Delay Brew time that was
set.
4 After the time has been set, press DELAY
again. Then use the Multi-Serve Dial to select
the brew style and then brew size of the
vessel you would like to brew into.
5 Select your brew style from the 4 flashing
buttons. The selected brew style will remain
illuminated.
6 Once the time, brew size, and brew style
have been set, allow DELAY BREW to stop
flashing or press DELAY BREW to activate.
When activated, the unit will beep and
DE LAY BREW and your selected options will
remain illuminated. To cancel, press DEL AY
BREW again.
NOTE: For best results, we recommend
rinsing the reservoir after brewing and
refilling with fresh water for the next brew.
NOTE: The glass carafe, brew-through lid,
permanent filter, removable filter holder, water
reservoir, lid, and scoop are dishwasher safe.
NOTE: If the clock ever reads “CLOG” it
indicates heavy scale buildup on the boiler.
Run a clean cycle before attempting to brew
again.
NOTE: Running a water-only clean cycle will
not descale the brewer properly.
IMPORTANT: DO NOT remove the carafe at
any time throughout the clean cycle.
Loading ...
Loading ...