Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
73
Configuration > PTZ > Prioritize PTZ.
Figure 5-37 Prioritize PTZ
2. Select Network or RS-485 from the dropdown list
3. Set the delay time.
4. Click
to save the settings.
5.4.10 Position Settings
Purpose:
You can configure the position settings in this interface, including the position information of the
device.
Note: Position settings may not be supported by certain camera models.
Steps:
1. Enter the Position Settings interface:
Configuration > PTZ > Position Settings
Figure 5-38 Position Settings
2. Manually find the north position for the speed dome in Live View interface, and click Set at
North to set the north direction.
3. After the speed dome changes its direction, you can click Point to North and the speed dome
turns back to the north direction.
4. You can manually set GPS information of certain camera including Longitude and Latitude.
5. Click
to save the settings.
Loading ...
Loading ...
Loading ...