Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
61
Figure 5-26 Configuring Region Exiting Detection
3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the line crossing detection interface. Optionally, you can click the
button to manually activate the movement, or lock the movement
when the button turns to
by clicking it.
4. Select the region from the dropdown list for detection settings.
5. Click the
button to start the region drawing.
6. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click the
button to clear all pre-defined regions.
7. Configure the parameters for each detection region separately.
Sensitivity: The value of the sensitivity defines the size of the object which can trigger
the alarm. When the sensitivity is high, a very small object can trigger the alarm.
8. Click
tab to enter the arming schedule setting interface. The time
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection for more details.
9. Click
tab to select the linkage method taken for the region exiting alarm,
Notify Surveillance Center, Send Email, Upload to FTP, Trigger Channel, Smart Tracking,
White Light Flashing, Audible Warning, and Trigger Alarm Output are selectable.
For speed dome, you can also choose to link smart tracking. Smart Tracking should be
configured in advance.
Loading ...
Loading ...
Loading ...