Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
26
Note:
You can configure up to 272 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the preset.
Figure 4-7 Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Notes:
The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the
camera starts auto scan function.
Pattern function varies depending on different camera models.
Table 4-5 Special Presets
Preset
Function
Preset
Function
33
Auto flip
92
Set manual limits
34
Back to initial position
93
Save manual limits
35
Call patrol 1
94
Remote reboot
36
Call patrol 2
95
Call OSD menu
37
Call patrol 3
96
Stop a scan
38
Call patrol 4
97
Start random scan
39
Day mode (IR cut filter
in)
98
Start frame scan
40
Night mode (IR cut
filter out)
99
Start auto scan
41
Call pattern 1
100
Start tilt scan
42
Call pattern 2
101
Start panorama scan
43
Call pattern 3
102
Call patrol 5
44
Call pattern 4
103
Call patrol 6
45
One-touch Patrol
104
Call patrol 7
46
Day/Night Auto Mode
105
Call patrol 8
Loading ...
Loading ...
Loading ...