Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
64
7. Configure the parameters for each detection region separately.
Threshold Level: If you set the value as 5, alarm is triggered immediately after the
object entering the region.
Sensitivity Level: The value of the sensitivity defines the size of the object which can
trigger the alarm, when the sensitivity is high, a very small object can trigger the alarm.
8. Click
tab to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer
to Section 5.2.1 Configuring Motion Detection for more details.
9. Click
tab to select the linkage method taken for the object removal alarm,
Notify Surveillance Center, Send Email, Upload to FTP, Trigger Channel, Smart Tracking and
Trigger Alarm Output are selectable. Refer to Section 5.2.1 Configuring Motion Detection
for more details.
10. Click
button to save the settings.
5.4 PTZ Configuration
On the event configuration page, click
to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on different camera models.
5.4.1 Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset freezing, preset
speed, etc.
Steps:
1. Enter the Basic Settings interface:
Configuration > PTZ > Basic Settings
Loading ...
Loading ...
Loading ...