Loading ...
Loading ...
Loading ...
Fluke 123/124
Users Manual
36
The readout shows the voltage difference between the two
cursors and the voltages at the cursors in relation to the
zero icon (-). See Figure 1-19).
Use horizontal cursors to measure the amplitude, high and
low value, or overshoot of a waveform.
Using Vertical Cursors on a Waveform
To use the cursors for a time measurement, do the
following:
c
From Scope mode, display the
Cursor Key functions.
d
Press to highlight . Observe
that two vertical cursors are
displayed. Markers (-) identify the
point where the cursors cross the
waveform.
e
If necessary, choose the trace A
or B.
f
Highlight the left cursor.
g
Move the left cursor to the desired
position on the waveform.
h
Highlight the right cursor.
i
Move the right cursor to the
desired position on the waveform.
Figure 1-20. Time Measurement with Cursors
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...