Loading ...
Loading ...
Loading ...
5.
Draw detecon area.
1) Click .
2) Click on the live image to draw the boundaries of the detecon area, and right click to
complete drawing.
6.
Oponal: Set the minimum size and the maximum size for the target to improve detecon
accuracy. Only targets whose size are between the maximum size and the minimum size trigger
the detecon.
1) Click , and drag the mouse on live image. If you want to change the size, click the buon
and draw again.
2) Click , and drag the mouse on the live image. If you want to change the size, click the
buon and draw again.
7.
Set detecon parameters.
Sensivity The value of the sensivity denes the size of the object which can trigger the
alarm, when the sensivity is high, a very small object can trigger the alarm.
Threshold The threshold is the me of the objects removed from the area. If you set the
value as 10, alarm is triggered aer the object disappears from the area for 10
seconds.
Figure 8-8 Draw Area
8.
Click Save.
9.
Oponal: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
10.
Set arming schedule. See Set Arming Schedule .
Network Speed Dome User Manual
90
Loading ...
Loading ...
Loading ...