Loading ...
Loading ...
Loading ...
Figure 7-9 Serial Port Sengs
2.
Set the No., Baud Rate, Data Bit, Stop Bit and Parity.
3.
Set the Peripheral Type as Card Reader, QR Code Scanner or Disable.
4.
You can view the serial port type, connected device model and peripheral
soware version.
5.
Click Save.
Host Parameters
Set door contact sengs and RS-485 protocol.
Steps
1.
Click Conguraon → Access Control → Host Parameter to enter the page.
2.
Set door contact.
Note
You can set the door contact as Door Open Status or Door Closed Status according to your
actual needs. By default, it is Door Open Status.
3.
Set RS-485 protocol.
4.
Click Save.
DS-K3Y220(L)X Series Flap Barrier User Manual
47
Loading ...
Loading ...
Loading ...