Hikvision DS-K3Y220X User Manual

Loading ...

Figure 4-3 General Wiring

Note

●

The power cable from power supply to the main lane control board has been connected. You will

need to prepare the 14 AWG power cable to connect the AC power input to power supply.

●

The supplied 2 interconnecng cables need connecng on-site:

1. 24 V power cable of 14 AWG. The cable is 4 m in length and put inside the right and middle

pedestal at the exit.

2. CAT5e

Communicaon cable. The cable is 4 m in length and put inside the package of the

right/middle pedestal.

●

The ① and ② or ③ and ④ refer to the two sides of a same board.

●

Barrier opens at the entrance/exit: connect to BTN1/BTN2 and GND.

4.3.2 Main Lane Control Board Terminal Descripon

The main lane control board contains interconnecng interface, USB ash drive interface

(reserved), access control board interface, re input interface, exit buon interface, 12 VDC output

interface (reserved), 24 VDC input interface, fan interface, communicaon interface, encoder

DS-K3Y220(L)X Series Flap Barrier User Manual

Loading ...

Hikvision DS-K3Y220X Value Flap Barriers